Production technology of progressive lenses
In addition to the evolution in design, the production technology of progressive lenses is also constantly improving: the most representative one is the free-form technology. The emergence of free-form surface technology makes the production more flexible and rapid and can realize a more personalized design. For now, progressive lens design is done on the inside surface of the lens by a computer-controlled lathe, as if a master engraver could carve a piece of stone into a work of art.
How to Perform Glasses Measurements?
If there is no number on the temple of eyeglasses, you can perform glasses measurements by yourself. Now, we will show how to do that.
To measure the glasses’ size, you need to prepare a ruler or a tape first. To measure the frame width, measure the entire horizontal front of the frame, from the furthest extended point on either side. As for lens height, you should measure the vertical height of the lens. As for the bridge, you should measure the part that goes across the bridge of your nose. The temple arms include the front of the frame on either side and the rest behind your ear. The lens width is the horizontal diameter of one lens. So, when measuring these, you should be careful.
After that, you have measured the glasses frame size. If you want to know whether your face is right for this frame, you can read the post: How to Measure Face for Glasses Frames - 7 Steps
If you need a pair of new glasses, you can try Koalaeye glasses. They are stylish and cheap and they are lots of available choices.
Select the lens.
The choice of lenses is one of the matters to note with glasses. Teenagers are active and often do sports. They can choose resin lenses, which are light, durable, and not broken. For some adolescents with complex refractive conditions, it is best to customize the lens in the case of the need for custom lenses, to get the perfect pair of glasses. Choose the refractive index that is right for you. The thickness of the edges of the lens is related to the size and shape of the frames in addition to the refractive index. The original state of the myopic lens is a circle that is thin in the middle and thick around, and then it is ground into the shape that suits the lens frame. If the thinnest center is relatively far from the edge of your frame, that is, if that frame is large, the edge of the lens will be thicker.
How to buy prescription glasses online?
Go to the ophthalmology department of a regular hospital first, because you need to take a photo of your optometry sheet to the seller when buying glasses online. Accurate optometry is the first step in choosing the right glasses. After getting the prescription, we can choose the frames online. Various material frames have different properties. Some are light and some are tough. In short, each has its own characteristics. I can't say which one is better. According to your own needs and face shape, choose the suitable glasses frame. Next, choose lenses. There are mainly two types, spherical lens, and aspherical lens. The aspheric lens is better. Also, confirm what specific functions are needed, such as radiation protection, UV protection, etc. Finally, the seller will look at the data on the prescription. If your eyes have high astigmatism, you need to add money. Then take the payment and wait for your new glasses. It’s unbelievable that you can buy glasses online in just a few minutes. Buying eyeglasses online is fast and convenient.
Features of pure titanium glasses frame
Due to the lightweight (ordinary nickel-based alloy frame weight 48%-60%), high strength, corrosion resistance, surface easy coloring, beautiful and durable features of spectacle frame made of pure titanium, they have been loved by most consumers. But the elastic modulus of pure titanium is higher (about 120GPa). The temples of the frames made from them are not elastic enough. After wearing the glasses for a period of time, the temples of the glasses need to be adjusted due to the relaxation of the stress. The processing plasticity of titanium metal is worse than that of other metal materials, so the processing technology of its wire is difficult. The surface quality is difficult to control, and the technical content is high. The surface quality of pure titanium wire produced by a few domestic manufacturers is poor.
Benefits of MR Lenses
It is made of MR series material of Mitsui Chemical, Japan. The biggest advantage is that it is both thin and has good optical properties. Besides, the material has good impact resistance and toughness, so it is not easy to be deformed or broken. Wearing such lenses not only looks more beautiful, but clear and comfortable, and safe at ease. Using a lower density polyurethane material, the lens is lighter and thinner, making it more comfortable to wear. The higher machining success rate increases the processing efficiency and reduces the processing cost. The film compatibility and dyeing properties of MR™ are better than those of ordinary materials, which can improve the quality of functional lenses like photochromic lenses and myopic sunglasses. MR-8™ combines high refractive index, high Abbe number (for better imaging), and better processing performance, suitable for rimless, half-frame, and other glasses, which are less broken and safer. MR-7™ provides better dyeing performance, faster and more uniform color application, and can be used for myopic sunglasses. MR-8 Plus™ is safer and further improves the impact resistance of the lens while maintaining the high Abbe number of MR materials.
What is the best lens material?
The world's first resin lens was made of CR-39 material, and CR-39 is still the main optical lens material in Europe and the United States. After the end of World War II, people found that compared with glass, the main lens material at that time, the light transmittance of CR-39 is high, and it can block ultraviolet light. In addition, CR-39 can be dyed, not easy to fog, and has small dispersion (CR-39's Abbe number is 58) and other benefits.
