A clear frame leads the way.
Clear glasses are almost always dominated by large frames. The big frame is an acceptable frame for any face shape. clear rimmed glasses are on the rise, so buy a pair before they hit the streets. Some are full of clean feeling, and the lens frame is slender and elegant. Some models are simple and versatile, suitable for all kinds of fashion styling. Light and fashionable, the collocation of clear frame and aureate glasses frame, is rich high-quality goods feeling.
Protect the lenses of your safety glasses.
Scratches can be caused by damage at work, aging, improper care, improper cleaning, or improper storage. Whatever the cause of a scratched lens can affect vision quality through the polycarbonate, causing eye strain. Make sure the safety glasses lenses are replaced in time when they are scratched.
Color process of Contact lenses
Pigment printing process
It refers to the direct printing of pigments or patterns on the inside of the lens and then drying, which is the main production process of poor-quality chromatic contact lenses. Usually, small factories and small workshops use this method. The lens is being phased out because the pigment can easily seep out from the surface during wearing, causing discoloration and staining, and irritation to the eyes, which is a big risk.
Pigment build-in process
To be specific, the lens made by sandwich technology is a three-layer structure, the front and rear are colorless transparent layers, and the middle is a colored layer. After the processing of sandwich technology, the color layer is wrapped in the middle of the front and rear transparent layer, so that the pigment will not contact the eyes, which will not cause irritation and injury to the eyes. The downside of this process, however, is that the lenses are slightly thicker than normal contact lenses and are less oxygen-permeable, so they are not suitable for long-term wear.
The pressed film manufacturing process
This is a relatively new method of a similar sandwich process, and the color (pattern) is also made between the front and rear layers of the lens. But the color (pattern) is used to fill in the film process. During lens curing, the pigment seeps into the material instead of sticking to the surface. It feels as if the lens is covered in color within a single layer. This reduces the middle layer and makes the lens thinner, which naturally makes it more comfortable and permeable to oxygen.
You can choose driving goggles.
The goggles partly filter the far-light from the car. Products sold online include glasses with yellow lenses and yellow translucent shades that clip onto car shades. Shades block out oncoming far-light, while glasses prevent rearview mirror glare from vehicles behind. Most of the light emitted by car headlights is short-wavelength ultraviolet and blue light. The yellow polyester blocks them while allowing the longer wavelengths of red and green light to pass through, making the headlights softer when seen through the goggles without reducing the brightness of the road and the surrounding environment.
Adolescents and adults with myopia
Teenagers have heavy learning tasks, and excessive eye use is the norm, so pseudomyopia is the majority. And many of them have false and true myopia coexistence. As adolescents grow and hair, the eyeballs are also developing, and the wheelbase may be further lengthened, so myopia will continue to progress and deepen. The use of mydriatics by adolescents can force the ciliary muscles to relax and eliminate pseudomyopia. But after the pupil is dilated, the ciliary muscles will also lose their ability to adjust, changing from 'nearsightedness' to 'hyperopia', which will delay daily learning. And after the efficacy of the drug has passed, if you continue to use your eyes unscientifically, pseudomyopia will still occur. Therefore, the mydriatic agent is only used as an auxiliary method to eliminate false myopia when wearing myopia glasses, not as a treatment method for myopia.
Adult myopia is based on true myopia. In addition, the eyeballs of adults will no longer develop, so the degree of myopia is relatively fixed and rarely changes.
What To Do with Old Glasses?
You can also choose to send your old glasses to others. You can ask your friends or ask around your social network to see if someone needs a pair of glasses. Then give them the old glasses.
If your glasses are too broken to be redistributed, do not just throw them out. You can choose to throw your old glasses into the recycle bin and they will be recycled.
If the only reason to give away your old glasses is that they are broken, you can try to repair them. After that, they can be useful.
The taboos of wearing glasses while driving at night
Night driving members should not wear tawny, green, and gray glasses. Tawny glasses can filter out most of the ultraviolet rays, although can make our eyes feel relaxed but easy to make people sleepy. Green glasses will turn red lights into black, directly affecting our judgment of traffic lights, so there is a great safety risk. Grey glasses, due to their low light transmittance, will weaken our line of sight and affect our observation of the road.