Prescription Safety Sunglasses
Thu, Jun 16, 22 By : Koalaeye
Evolution of hard coating technology The first generation of the use of hard coating technology began in the early 1970s, the quartz material is deposited on the surface of a resin lens under vacuum conditions, form a very hard anti-wear film. However, due to the mismatch between the thermal expansion coefficient and the film base material, it is easy to delaminate and crack the film. Instead, it forms the mottle on the surface of the lens, and the effect is...

Evolution of hard coating technology

The first generation of the use of hard coating technology began in the early 1970s, the quartz material is deposited on the surface of a resin lens under vacuum conditions, form a very hard anti-wear film. However, due to the mismatch between the thermal expansion coefficient and the film base material, it is easy to delaminate and crack the film. Instead, it forms the mottle on the surface of the lens, and the effect is not optimal.

The second generation of hard coating technology is the use of the 1980s. The surface of the resin sheet is coated with a material with high hardness and not easy to be brittle and cracked by an immersion process. At this time, anti-reflection coating lenses had appeared and gained the recognition of consumers, but the mismatch between adding hard coating and anti-reflection coating still caused serious lens wear.

The third generation of hard coating technology was developed in the 1990s, mainly in order to solve the problem of wear resistance after coating resin lenses with an anti-reflection film. The hardened material evolved into a polymer organic matrix material.

Fourth-generation coating technology is dominated by silicon atoms, in which the hardened solution contains both organic substrates. It contains inorganic ultrafine particles, including silicon elements, which make the hard coating not only tough but also hard.


How to adapt to progressive lenses?

People who are prone to motion sickness or have inner ear diseases may suffer dizziness, nausea, vomiting, and other symptoms due to their inability to tolerate the slight deformation of the visual objects, so they need to pay more attention when wearing them. For people who have not worn reading glasses before, it is not recommended to wear graded multi-focus glasses directly because their eyes will not be able to adapt quickly.



Different types of nose pads for glasses

The fixed nose pad is usually used on the plate frame. The nose pad and the frame form an organic whole. The maintenance is more convenient, unlike the movable type that should often twist a screw. It is not easy to hide dirt and dirt. But the disadvantage is that the angle of the nose pad can not be adjusted, and it can not fit the bridge of the nose greatly. The movable nose pad can be automatically adjusted up and down according to the shape of the bridge of the nose to ensure that the compression part of the bridge of the nose is evenly stressed and the local pressure is reduced. But the disadvantage is to often check the tightness of the screw, but often scrub clean. The silicone material usually used in the nose pad is easy to yellow after a long time, which affects the appearance.


What Should You Do If Your Glasses Are Broken?

A professional eyewear repair shop ensures accurate repair. Fixing metal frames requires special welding equipment and expertise, and you could injure yourself or your frame if you try to weld them by yourself. A professional can make sure your glasses are accurately repaired. If you're not precise enough in repairing a damaged frame, you may be able to see through a crooked pair of glasses, which can damage your vision. Plastic frames are easier to fix than metal frames. Fixing the frames by yourself poses a greater risk than having them repaired by a professional.



Wearing glasses correctly will not get deeper degrees

The development of myopia is not directly related to wearing glasses. Patients with myopia wear suitable glasses and pay attention to eye hygiene, and the degree of myopia will stabilize at a certain level. But if you think that with glasses, everything will be fine. If you don't pay attention to eye hygiene in normal times, if you continue to keep your eyes in a state of fatigue for a long time, it will lead to vision loss and deepening of myopia. In addition, wearing improper glasses such as no optometry or inaccurate optometry, too large power, will increase the burden on the eyes, reduce vision and deepen the power. For some people with high myopia (more than 600 degrees), although they insist on wearing glasses, the degree will still deepen, accompanied by changes in the fundus, which is medically called pathological myopia. This deepening of myopia is related to the degree of myopia and family and has nothing to do with wearing glasses.


Glasses are no longer ordinary daily necessities. A pair of glasses not only can assist eyesight, but also enhance or even change your temperament. In addition to the material, color, and shape, when choosing glasses, the most important thing is to match your face. Some frames are really good-looking, but they will be scary if they don’t match the shape of your face. Today we will talk about how to choose glasses according to your face shape.



Lotos - Glasses For Men

Lotos is a famous eyewear brand. The brand was founded in 1872. The skills of making glasses are very clever, and the craft and style are very strict. More importantly, there is no logo on the glasses, which is very popular among business elites. LOTOS is renowned in Europe for creating fashion with pretty high-quality materials and attractive glasses frames. It is these unique and charming aspects that make it a favorite of trendsetters and a favorite object of collectors.

Related The Blog
Submit comment
Cart
Close
Back
Account
Close