Best Anti Glare Sunglasses
Wed, May 04, 22 By : Koalaeye
The glasses are too loose or too tight at the temple. If your glasses are too tight on your temples, you will feel uncomfortable. On the other hand, if your frames are too loose, it can make you look not energetic. Either way, you can adjust the frames at home to make them more comfortable. If the arm squeezers your temples. If the frames are metal, hold your lenses in place with your less-used hand. Use your dominant hand to...

The glasses are too loose or too tight at the temple.

If your glasses are too tight on your temples, you will feel uncomfortable. On the other hand, if your frames are too loose, it can make you look not energetic. Either way, you can adjust the frames at home to make them more comfortable. If the arm squeezers your temples. If the frames are metal, hold your lenses in place with your less-used hand. Use your dominant hand to gently press outwards on the corner of the frame, between the hinge of the frame and the lens. Repeat this step on the other side of your body to make your temples looser. If the frame is too loose from the temple. Again, for metal frames only, use the same method as you used to relax the frames, but apply slightly inward pressure on the corner between the hinge and the lens. Repeat on the other side, tightening the fit around the temple. Adjusting the temples of rimless, half-rimless, or plastic frames can break them. You are advised to take these frames to the optical shop for adjustment.


Method of wearing the contact lens

Wash your hands before putting on contact lenses, and be careful not to leave long nails, to avoid contamination of the lens by bacteria and nail scratches. Place the contact lens on the tip of your index finger, face-up, and pull your upper and lower eyelids apart with the middle fingers of both hands. Look straight ahead and place the lens gently into the eye (attached to the cornea). Remove the index finger and look down so that the lens is attached to the cornea, and slowly relax the eyelids with the middle fingers of both hands. Blink gently several times (or roll your eyes) to remove bubbles.



What are pure titanium rimless glasses?

Pure titanium rimless glasses combine the advantages of pure titanium glasses with rimless glasses. Rimless frames are mainly focused on lightweight, reducing the pressure on the wearer and enhancing comfort. Moreover, rimless frames are not obvious either in appearance or in weight, which alleviates some of the distress caused by myopia. Pure titanium material increases this lightness to the extreme. Pure titanium frame has a uniform and natural color. It is not easy to fade, not easy to rust, and anti-allergy. It is the pursuit of high-end taste glasses lovers' first choice.


Pure titanium has special current characteristics

Pure titanium can guide electron fluctuations to produce ions, causing the current to tend to ionize. The positive and negative ions can adjust the adverse effects of electromagnetic waves caused by the body's biological current disorder and have a great health care effect on the human body in order to avoid fatigue, muscle stiffness, soreness, and other symptoms or problems.



Types of aspheric lenses

There are two types of aspheric lenses: single aspheric surface (single aspheric surface for short, different from the outer aspheric surface and inner aspheric surface) and double aspheric surface (double aspheric surface for short). For the outer aspheric surface, convex is an aspheric surface and concave is a spherical surface. For the inner aspheric surface, a convex surface is a sphere, and a concave surface is an aspheric surface. In addition to correcting aberrations, the double aspheric lens also improves the effective field of vision compared to the single aspheric surface. When people's eyes look through the edge of the lens to see things, like driving when looking at the reflective mirror, it often affects vision because of the large aberration at the edge of the lens. Previous designs of aspheric plates have analyzed a single ray of light passing through the center of the pupil. Wavefront technology controls the entire beam of light passing through the pupil, eliminating high-order aberrations.


Testing of aspheric lens

The optical axis of the optical center just overlaps with the visual axis of the eye, which is the most ideal state. Because the light from the edge cannot form a focus on the optical axis, when the optical axis does not overlap with the visual axis (the difference is greater than 2mm), such unclear and scattered imaging results will occur. When choosing frames and aspheric lenses, you need to ensure that they fit correctly, to achieve the best visual and decorative effects. Simply put, due to the special design of the lens, we found through a calculation that the optical center should move down 1mm higher than the pupil for every 2° increase in front inclination angle. Otherwise, the wrong pupil height will cause the lens to look like astigmatism, and cause discomfort. For glasses with aspheric lenses, there must be an inclination angle after wearing. The specific angle varies from person to person.



Anti Blue Light Glasses For Kids - Felix Gray Nash

This square frame is stylish and comfortable, and children will love this popular color. In addition to filtering out blue light, the glasses eliminate glare. There are four different colors.

Related The Blog
Laissez un commentaire
Cart
Close
Back
Account
Close