Mens Polarized Driving Sunglasses | KOALAEYE OPTICAL

Mens Polarized Driving Sunglasses

What's wrong with your not clear phone's screen, low brightness, or even black screen when wearing polarized sunglasses?

There is a polarizing plate in the display structure of the mobile phones, which comes from the photoelectric modulation effect of the display screen. There is a polarized light absorption axis in the polarizing plate, which is consistent with the polarized light absorption principle of the polarized sunglasses. If the polarization absorption axes of the two are parallel, the screen can be seen. When they are perpendicular to each other, the light emitted by the screen will be absorbed by the sunglasses, and the light cannot reach the eyes, leading to the phenomenon of the black screen or low brightness. There may be differences in the direction of the absorption axis of the polarizer. So after wearing the polarized lenses, when you see low brightness or black screen, there are two different situations: landscape screen and portrait screen.


The benefits of bifocal glasses

People with myopia often need to wear bifocal glasses after the appearance of presbyopia. The upper and lower parts of the lens have different diopters. The upper part is used to see distant objects, and the lower part is used to read and do close work. In addition to presbyopia, some people who work long hours in close quarters need bifocals to reduce eye strain. Studies have shown that long-term nearsightedness is the main cause of myopia. According to the adjustment principle of the eyeball and the height of the patient diopter, a reasonable measure is to wear myopia glasses with full correction when seeing the blackboard in class. When reading and writing. they should take off glasses or wear low myopia glasses. But the practice of continuously removing and putting on or changing glasses is clearly unrealistic. Bifocal glasses will solve this problem.



Do Reading Glasses Hurt Your Eyes?

Do wearing glasses worsen your eyesight? You may also have this question. No, wearing glasses shouldn’t worsen your eyesight even if you have 20/20 vision. People wear glasses for many reasons, such as correcting the way the eye process light and visuals. Wearing glasses doesn’t mean poor vision because the refractive error does not mean you will need to wear corrective eyeglasses.

The decision to wear glasses is up to you. If your eyes feel fine, and your vision is sufficient without them, they might be unnecessary. And you need to know that glasses can improve your eyesight while you are wearing them as long as you get the correct prescription.

Reading glasses are good for presbyopia people because they can it more comfortable for them to see things as close range. But what if you do not have presbyopia or problems seeing things up close? Is it bad to wear reading glasses when you have perfect vision?

No, wearing reading glasses does not hurt your eyes, no matter your level of visual acuity. So, if you need a pair of reading glasses, Koalaeye glasses are recommended. They are stylish and come at a cheap price.


The inadequacies of bifocals

The field of vision is smaller than that of the single vision lens, especially for the close view. For example, reading and reading newspapers need to make it coordinated with the head movement, there are optical defects of image jump and image displacement. There is a boundary, and it is easy to be seen that wearing a bifocal lens exposes age. Bifocals clearly demarcate the near and far regions, affecting appearance and vision. And when far view and close view change, the objects will jump. Because most myopic patients have a lag in the adjustment response, wearing bifocal lenses not only does not delay the development of myopia but has side effects. Therefore, bifocals are not suitable for teenagers to control myopia, and only a few special patients need to wear bifocals.



Are beta titanium glasses frames expensive?

What’s the probable price of a Beta titanium eyeglass frame? The price of β titanium frame and pure titanium are similar, and the price is usually high, But hundreds to thousands, according to the brand and workmanship. Beta-titanium is usually cheaper than pure titanium. Why are titanium and beta-titanium cheap, but expensive to process into eyeglass frames? The so-called pure titanium and β titanium frames are really titanium alloy frames in the strict sense, and the processing difficulty is really great. IP plating must be used for electroplating, so the processing cost is much higher than that of copper alloy, and the labor cost needs to be included.


Semi-rimless glasses

With a half-frame design, the retro round glasses can be paired with a very thin metal frame, indicating the literary and elegant temperament. The frame with only the upper part of the lenses circle covering the lens integrates lightness and steadiness, highlighting the sense of fashion, not only shows the wisdom of business elites but the natural and free affinity. They are not heavy and relatively firm. It is suitable for different kinds of occasions. It can be used for business occasions, leisure occasions, and parties. It is stylish and composed, reflecting the quality of life.


Sale priceFrom
Sale priceFrom


How much should a pair of prescription glasses cost?

Speaking of glasses, everyone's first feeling may be that it is not cheap to have a pair of prescription glasses. Just such a small pair of glasses, ranging from a few hundred dollars to a few thousand dollars. Why is the difference so big? So some people go online to buy glasses for dozens of dollars as if they look the same. But is it actually the same? There are a lot of differences between the glasses for dozens of dollars and for thousands of dollars, apart from the price. Also, you should be responsible for your own eyes.

Better glasses brands will adopt better designs to ensure beautiful appearance and structural safety, and have stricter quality standards. At first, these glasses are not cheap because the cost has increased a lot. In addition to the brand, different materials, process requirements, and mass production scale will also affect the cost and thus the final selling price. As for the question of what price glasses to choose, my suggestion is to choose the high-priced one within your budget. So, to choose a suitable pair of glasses, what aspects need to be considered?

Leave a comment

All comments are moderated before being published.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.