How to pick a comfortable pair of glasses?
In the previous article, we discussed “What glasses frames are fashionable and beautiful?”. In this article, let’s talk about “How to pick a comfortable pair of glasses?”.
Problems you may encounter when wearing your glasses.
The glasses are too tight. They clamp to the temple. Glasses slip easily. Too long or too short at the bend, and there are too small contact areas of the nose pad. Glasses are too far from the eye, and the lenses are crooked or asymmetrical. These are some of the problems you may encounter when wearing glasses.
Consider the elements of frame comfort.
What we need to know is that the frame exists first as a positioning device for the lens, and secondly as a beauty. The pupil is consistent with the optical center of the lens, so it should not be too high or too low. The horizontal direction is not skewed, and there is no one high and one low phenomenon. Bilateral symmetry is a standard for manufacturing enterprises. Non-mechanical symmetry is for the wearer. The frame should be adjusted according to the size of the wearer's face. The frame is not easy to slide down, and frequent slide is prone to the phenomenon that the pupil is too high and low to match the face.
Consider possible uncertainties after the lens is installed.
Usually, in-store frames are made of plastic samples rather than actual lenses, so they weigh slightly less. However, it is necessary to consider the approximate weight of the lens in advance according to its own degree when trying it on, in case the weight is not suitable for real wearing. If the pupil distance is too small, it is not suitable to wear a wider frame. The machinist should strictly follow the left and right pupil distance instead of taking the average, otherwise, there will be pupil distance error in the left and right eyes, which will cause discomfort in wearing.
Have a try and confirm the front and side of the glasses.
Confirmation data: pupil height, flat frame surface, size of frame surface, the harmony of nose arc, the contact area of nose support, size of temple bend. Finally, remember a big principle: You should have no sense of pressure, and in a small range of motion, the frame does not shift. Good glasses should be perfectly integrated with the face so that people can not feel the existence of glasses. Good design is invisible. The lens above 800 degrees will be slightly heavy, so it is not recommended to choose the elastic temple and smooth metal temple. The temple is too slender, and at the same time is all metal, easy to slide frequently.
Thank you for your time in reading our passage “How to pick a comfortable pair of glasses?”. For more information about sunglasses and eyeglasses, please continue to follow KoalaEye Blog. Also, it is welcome to share and forward to Facebook and Twitter.