Optical Stores Provide Customer Experience
Traditional single product marketing has been far from meeting the needs of customers. It is necessary to apply practical artistic aesthetics to the decoration design of physical eyewear stores, product packaging, and marketing planning, to increase customers' experience of the store, increase store goodwill, brand memory, interest in the product, and stimulating customers' consumption. In reality, most eyewear retail stores are making great efforts in product selection, product display, consumer experience, marketing activities, service methods, and other aspects. For example, the introduction of themed display scenes in traditional optical stores, the layout of bricks-and-mortar stores of e-commerce to increase consumer service experience, and so on have achieved good results.
What are polarized lenses for?
Polarized lenses contain a layer of polarizing plates in which molecular chains form a light-grating structure in which dichromatic pigments, which absorb polarized light, are evenly distributed. A beam of light is absorbed when it vibrates in the same direction as the bars of the molecular chain of the polarized lens. The grating direction formed by the molecular chain of the polarizer is the axial direction of the polarizer, which is generally horizontal. When polarized lenses are worn, they absorb all the light that vibrates horizontally, thus absorbing the glare and preventing it from reaching the eyes.
The width of your glasses is important.
The width of your glasses is not just to make you look more attractive. It's related to the position of your pupils in each lens, which is inextricably linked to the quality of your vision. The frame could be slightly wider than the zygomatic bones. It should be wide enough not to touch the temple. It should be close to holding a finger. This is especially important for people who wear bifocals or progressive glasses, so you can see through the right part of the lens.
The Cons of Titanium Glasses
However, there are some negative voices of titanium glasses. Titanium glasses are more expensive than other materials. So, when purchasing titanium glasses, beware of the differences between pure titanium and titanium alloy.
Sometimes they need to be adjusted by professionals.
Some connecting parts of glasses will be loose, but some people do not care about them and make casual changes. In reality, the change of the lens frame is very technical. The distance between the lens and the glasses will affect the effective strength of the lens, so the adjusted glasses need to be 12 to 14 mm away from the eye. The optical center of the lens should be aligned with the pupil position, and the nose pad, the temples should be consistent with the contact part of the bridge of the nose and the ear, without pressure and pain. Therefore, the lens frame must be adjusted by a professional optician. Especially some special lenses (progressive multi-focus glasses) need to be repaired regularly.
Can You Put New Lenses in Old Frames?
In this section, we will show you how to replace new lenses with old frames. In general, optical shops will replace the lenses for you if your frames are in good condition and the shapes of the lenses is not too complicated.
So, can you put new lenses in old frames? Of course, you can do that if your old frame is good and shape of lenses is not too complicated.
However, glasses lens replacement depends on the quality of your existing frames, their conditions, and your prescription specifics. Not every pair of sunglasses or glasses for that matter can be reglazed. Sometimes fresh frames are required to match your new lenses. By far the most common reason for this would be because the existing frame is becoming brittle or is otherwise at risk of breaking. There is no point putting beautiful new lenses into a frame that breaks either during fitting or soon after.
In addition, when considering glasses lens replacement, you need to consider the materials of frames. In general, plastic frames are more likely to become brittle with age than metal frames. Of course, there are some other factors to be considered.
Contact Lens Materials - HEME Mixed Materials
Using HEMA as the matrix, other monomer components are added to improve the hydrophilicity, oxygen permeability, anti-precipitation, and other functions of the lens.
