The Optical Center of A Lens
When wearing glasses, try to look through the optical center of the lens. This needs the cooperation of the neck, you can slightly lower the head when looking at the computer, to adjust the line of sight. The Center of optical glasses is divided into two kinds: 1 mm up myopic lens center is the most proper, of course, more than 2-3. And the most important thing is that the lens pupil high (about the two-lens optical center of the high and low) must be proper (that is, the right of the lens optical center is 1 mm, the left must be 1 mm. 2-3 mm is the same, what is the height of the pupil on the right side must be the same on the left side. The optical center of the presbyopic lens is 1 mm, the most proper.
3 Common Problems with Progressive Lenses
Though progressive lenses are popular to correct some eye conditions, there are also some drawbacks. So, in the following section, we will show you some common problems with progressive lenses.
Dizziness: the three different focal lengths of progressive lenses can make people susceptible to dizziness, as well as vertigo. From long to medium to short distance, the lenses offer a gradient of increasing strength. So, it would have trouble in adapting the glasses for the people who are wearing them for the first time. A common mistake is to look out of the wrong focal length, causing their vision to be blurry and lead to an overall feeling of dizziness.
Peripheral distortion: another common problem of progressive lenses is the way in which they blur peripheral vision. Most glasses cause an initial distortion to vision. However, the three different segments found in these lenses can make that distortion feel more prominent than other pairs of eyeglasses. And most people may need two weeks to adjust to progressive lenses.
Depth perception: Since progressive lenses provide three different prescriptions to see objects clearly for different distances, it is important that you need to move your head instead of your eyes when focusing on objects at different distances. Prior to adjusting to this little nuance, progressive lenses can cause depth perception to feel off.
From the above information, you have known some common problems with progressive lenses. So, you may ask how to adjust the progressive lenses. The most popular way is that you need to wear them frequently.
Why Wear Horn Rimmed Glasses?
Horn rimmed glasses enable you to show off your sophisticated, intellectual side in style. Among the most popular variations, horn rimmed glasses are thicker with black rimmed frames. And this retro eyewear style has been popular for a long time.
So, not only can the horn rimmed glasses can correct your vision problem, but also can make you look more fashionable.
What are nose pads?
Nose pads include stipule stalk, stipule boxes, and stipules. The stipules are in direct contact with the nose and play a role in supporting and stabilizing the frame. Certain molded plastic frames may not have stipules and stipule boxes, and the stipules are connected to the mirror ring.
In fact, when designing different materials and different styles, the designer will judge whether nose pads are needed according to the comfort and aesthetics of the glasses. Generally, metal frames are equipped with nose pads, and the nose pads are movable in order to adapt to various nose shapes. Metal frames with nose pads can prevent some people's skin from being allergic to metal. On the other hand, metal looks more rigid and business, and adding nose pads is more beautiful and comfortable. Most glasses without nose pads are sheet-framed glasses. The sheet material is relatively light and non-allergenic. In terms of aesthetics and comfort, no nose pads are more suitable.
How do anti-blue light glasses protect the eyes?
The anti-blue light glasses available on the market, no matter what type, etc., are mainly the difference in anti-blue light effect, light transmittance, and frame, which will affect the cost of glasses. Obviously, the lens is the most important of these. I think that it is basically enough to choose 30% to 40% anti-blue light glasses. It is good to cut off the harmful blue light. It is not necessary to completely eliminate the blue light so that the chromatic aberration will not be too large, the light transmittance is better, and it also has a certain anti-blue light effect.
Of course, to protect the eyes, it is not enough to rely on anti-blue glasses alone. The effect of anti-blue glasses is mainly to reduce the probability of eye diseases, and can not effectively relieve eye fatigue. Normal people between the ages of 20 and 40 blink about 20 times per minute. When you open your eyes and stare at a computer screen that changes rapidly, the number of blinks will be reduced to 4 or 5 times per minute, resulting in serious insufficient secretion of scum and dry eyes. Therefore, no matter how urgent the work is, you must pay attention to the rest of your eyes, close your eyes regularly, use eye drops when needed, and reduce the brightness of the screen as much as possible when looking at the screen. When the brightness of the screen is significantly higher than the ambient light It is easy to cause eye fatigue. Try to use it as little as possible in the dark. To be honest, it is more important to develop a good eye-using habit.
Eyemart Express
Eyemart Express was founded with the clear goal of providing people with affordable, fast eyeglasses of the day. That has been their focus for 30 years and will continue to be their focus as they look to the future. Seeing things clearly is often life-changing, and they're dedicated to helping you see some of the greatest moments of your life. In short, Eyemart Express, they do not only hire talented staff. They invest in them. Their optical training and development program is designed to make their staff improve. They strive to develop insightful and intelligent leaders in workplaces and communities. They built a proud culture based on a clear set of principles: trust, compassion, openness to chances, and development. In short, they believe that developing great people creates the best environment for their business, their products, and most importantly, their customers.
Basic principles of progressive lenses
The surface of the progressive slice is divided into five regions. There are far, middle, and near optical areas. They are respectively corresponding to see distant objects, middle distance objects in the near distance objects. One pair of glasses is multi-purpose. In appearance, it is not very different from regular lenses. There is no clear dividing line. Distal use area: The area above the progressive slice is the distal use area, which is used to correct the distal refractive error. Proximity area: from the matching lens cross down, the refractive power of the lens continuously increases the positive degree, which is used to see close objects. Gradient area: The channel connecting the far and near areas. It is an area of regular change from top to bottom, used for transitioning and seeing objects at intermediate distances. The length of the gradient is very important for the wearer's adaptation. The rate at which the degree of gradient changes is called gradient. The gradient can be uniform or variable. Peripheral area: Changes in the surface curvature of the lens will lead to aberrations in the peripheral areas on both sides of the lens, mainly astigmatism and prism effect, which will interfere with a vision to a certain extent, resulting in blurred vision or distortion. And it will affect the wearer's adaptation to the progressive lens.
