Mens Round Acetate Sunglasses
Mon, Jun 13, 22 By : Koalaeye
How to Choose Glasses for Diamond Face Shape? After learning the features of diamond face shape, you should know how to choose glasses for diamond face shape. Since there are a lot of pointed features on the face, the best option is to use eyeglasses that have soft rounded curves instead of harshly pointed angles. So, look at the following advice. Cat eyeglasses: Cat eyeglasses would be a good choice for a diamond face shape. These glasses frames have rounded...

How to Choose Glasses for Diamond Face Shape?

After learning the features of diamond face shape, you should know how to choose glasses for diamond face shape. Since there are a lot of pointed features on the face, the best option is to use eyeglasses that have soft rounded curves instead of harshly pointed angles. So, look at the following advice.

Cat eyeglasses: Cat eyeglasses would be a good choice for a diamond face shape. These glasses frames have rounded bottoms so as to hide away the pointed chin and the narrow jawline of the diamond.

Round eyeglasses: Round eyeglasses are also suitable for diamond face shape because the round curve of the glasses hides the sharpness of the pointed chin. Glasses with colored frames are appealing in the case of diamond face shape people.


Progressive lenses and single vision lenses

Single vision lenses are the most commonly used prescription lenses. This lens type has a single field of view or a prescription ability of the entire lens and can be used to correct myopia (nearsightedness) or hyperopia (supervision).

Progressive multifocal lenses are lenses with different upper and lower powers for the upper part to see far, and the lower part to see near. The distance from the fixed power above the lens to the fixed power below the lens does not change suddenly, but there is a gradual transition between the two through the gradual change in refractive power.



Warby Parker

WARBY PARKER, one of the most popular eyewear brands in the United States, set up its own experience store in New York City in 2014, where consumers can walk in and out and try them on. They founded a rebellious spirit and lofty goals: to create high-quality, classic production, and the pursuit of fashion and high-quality glasses. Warby Parker's overall design is minimal. They provide many services to help you choose the frame. Almost every frame has a try-on picture and full view and provides a virtual try-on service. Free trial at home, physical experience stores, online virtual tries, and unconditional returns within 30 days really make you feel free.


About industrial pure titanium

For the industrial pure titanium, titanium content is not less than 98%, containing a small amount of oxygen, nitrogen, hydrogen, carbon, silicon, and iron impurities such as dense metal. The labels are TA1,TA2,TA3,TA4. It's arranged by more and more impurities. The TA1 titanium content is more than 99.5%, and the price is not high. But no matter which links, for molding, welding, polishing, processing difficulty is very great.The price of almost all titanium alloys in the national standard is higher than that of pure titanium.

In reality, the price of β titanium is higher than pure titanium. Pure titanium is almost no elastic, but β titanium is not only elastic, and has the advantages of ultra-light corrosion resistance. β titanium does not have a specific composition. Memory titanium can cost tens or even tens of times as much as pure titanium.

Using memory alloy to make glasses frame is the use of its superelastic characteristics at a certain temperature (elasticity is several times that of stainless steel) and did not use its memory function. Compared to beta-titanium, memory titanium is so difficult to process. It is so elastic that shaping is difficult and impossible at room temperature, and memory titanium heat treatment is another difficult and even secret process.



Glasses are tools to protect your eyes.

Wearing glasses can relieve eye strain. Myopia without glasses will inevitably lead to eyes easy fatigue, so the result can only be a deepening of the degree. After wearing glasses normally, the phenomenon of visual fatigue will be greatly reduced. For young people, because the eyeball is still in the development period, regulatory myopia easily develops into axial myopia. Especially for high myopia, the diameter of the eyeball before and after is significantly prolonged. If the myopia is rectified by wearing a normal lens from the beginning, this situation will be reduced or even not occur. If people with Myopic did not wear lenses in time, it will cause ametropic amblyopia. So if wear appropriate glasses, after a longer treatment, most eyesight will be gradually improved.


Glasses Size - Bridge Width

The bridge width is the distance between two lenses, measured from the innermost layer of each lens. Finding the right bridge width will allow your sunglasses or glasses to be put properly on the bridge of your nose. The bridge of the nose is an essential element because even though the frame looks pretty attractive, it helps people see more clearly. The precise distance between the two lenses helps reduce the pressure on the eye, helping the nose, without putting too much pressure on the inside of the eye. The size of the eye and the size of the bridge is usually adjacent, sometimes separated by a square icon.



Does it take time to adjust to progressive lenses?

How long should it take to get used to progressive lenses? I have never worn glasses before.Progressive lenses were developed to allow easy switching between near and far views. Progressive glasses are divided into four parts. The upper part is the far-light region. The lower part is the near-light region, and the middle part is a variable light region. From top to bottom, if the hyperopia film is gradually increased and the myopia film is gradually decreased. The middle variable area is on both sides of the astigmatism area. Because of the prism effect, when you see things, through this area, the object will be blurred, and the eyes will feel uncomfortable. If the height of the frame itself is very small, the transition zone of progressive multi-focus is very narrow, and the eyes may not adapt to the sunglasses. The current design of progressive lenses is still not mature. Imported brands are relatively stable but expensive, and domestic brands are not mature in design. For various reasons, progressive glasses may be difficult to adapt to wearing.

Related The Blog
Submit comment
Cart
Close
Back
Account
Close