Can you repair rimless glasses by yourself?
Splice the broken temple of the glasses into its original position on the glasses. Cut a piece of tape about 10cm long and pass it through the gap between the temple of the glasses and the base of the spring. Place the tape on the inside side of the glasses and tighten the other side with your hands. Then apply the outer tape to the temple of the glasses and press it down with your hand. Cut a piece of tape about twice the circumference of the bottom of the temple of the eyeglasses and stick it around the bottom of the temple of the eyeglasses. Cut a piece of tape about twice the circumference of the upper-middle part of the temple and use it to stick the top of the tape used in the first step. Then a piece of tape roughly twice the circumference of the middle leg of the glasses was used to tape the area between the two steps. Then repeat the previous step, and introduce another layer of tape from the gap on the outside of the adhesive tape. First, cut off a piece of tape as long as the temple of the glasses and stick the end of it to the bottom of the temple at an angle of about 60 degrees. Then tighten the other end with your hand, making it stick upward in a spiral until it covers all the tape in front.
Who need progressive lenses?
There is no limit to the degree of progressive multifocal lenses. Whether it is nearsightedness, presbyopia or moderate astigmatism, it can be worn, but not everyone can wear it. There are two types of progressive multifocal lenses on the market, one is hard and the other is soft. The main difference between the two designs is the length of the progressive channel. The rigidly designed progressive film has a short progressive path and relatively less peripheral aberrations. In order to ensure vision at various distances, fewer vertical dimensions are required. For example, a teenage progressive film belongs to this design, but because of its short gradual path, the gradation process is too short. Fast. Compared with the elderly, this design is more difficult to adapt; the soft design of the progressive film has a relatively long gradation channel and relatively large peripheral aberrations, but due to its long gradation channel, the gradation process is relatively smooth, which makes it easy to wear glasses It is suitable for people with poor adaptability.
If you are a person who is able and willing to accept new things, understand and adapt to the temporary discomfort caused by progressive addition lenses, we suggest that he can wear a pair, if he has severe hypertension, dizziness and other symptoms, or People who have misunderstandings about progressive lenses and are unwilling to adapt should not try them. Because you first wear progressive multifocal glasses, you may experience: slight dizziness, shaking when walking, and being careful when moving up the stairs.
The perception of space has changed, the perception of the distance of the object, and the perception of depth have changed. New wearers should not drive immediately and do strenuous exercise. When you look close, you need to turn your eyes down, and your eyes are mildly uncomfortable. Seeing an object through the blurred vision area around the lens makes the object blurred. Therefore, when new wearers look at things, turn their heads more, turn their eyes less, try to use the far-use zone, the near-use zone, and the middle-distance zone to see objects.
FACTORY900
It has an avant-garde design and a very three-dimensional look. Many of its designs have gone beyond traditional eyewear. It has been producing plastic frames internally for 80 years. They have a history of pursuing technology, innovation in design, and special technology of plastic molding. And they are said to be available only to them in the world. They created a new type of EYEWEAR with the concept of THE FUTURES EYEWEAR. With the addition of planning and design to internal integrated production, it has been one of the few factory brands to perform almost all processes in the factory. Its unique shape and avant-garde design are highly valued not only in Japan but around the world.
Do blue light glasses actually block blue light?
Anti-blue light glasses are still popular on the market. This kind of glasses is said to be 'anti-radiation and anti-blue light', but this kind of hot-selling anti-blue glasses has many problems. At present, such anti-blue glasses mainly block or absorb blue light through special materials, but there are two misunderstandings in its blue light protection. One is that the protection is not preventable, and the other is that the color cast caused by the wrong protection makes visual fatigue aggravated. Studies have shown that our eyes are the most intolerant of blue light in the 400nm to 440nm band. Therefore, current manufacturers mainly block blue light in this band when producing anti-blue glasses. But the electronic products that we often come into contact with nowadays produce blue light between 450 nanometers and 490 nanometers, and anti-blue glasses have almost no protection in this wavelength. Generally speaking, the blocking rate of anti-blue glasses is 20% to 30%, but now the blocking rate of anti-blue glasses on the market basically reaches 80% to 90%. This high blocking rate can also easily cause a color shift. , It is easier to make the eyes tired.
Night Driving Glasses Fit Over Prescription Glasses
They have a plastic frame polarized anti-reflective coating Bridge. The ergonomic design of these Peekaco night vision glasses means you can easily wear them over your prescription lenses. Yellow lenses protect your eyes from glare and improve color clarity and optical clarity. Peekaco night vision glasses can be used in a variety of complex environments. It eliminates the high beams and illuminates the ground. On foggy days, it illuminates and clears the field of view. TR90 is a durable material, very flexible and light. Peekaco wraparound sunglasses are flexible enough to be suitable for each face shape.
What Should You Do If Your Glasses Are Broken?
A professional eyewear repair shop ensures accurate repair. Fixing metal frames requires special welding equipment and expertise, and you could injure yourself or your frame if you try to weld them by yourself. A professional can make sure your glasses are accurately repaired. If you're not precise enough in repairing a damaged frame, you may be able to see through a crooked pair of glasses, which can damage your vision. Plastic frames are easier to fix than metal frames. Fixing the frames by yourself poses a greater risk than having them repaired by a professional.
What frames can you choose?
According to its style, the spectacle frame can be divided into full frame, half frame, no frame, and eyebrow frame, combination frame, etc. They each have their own characteristics, but have their own loyal fans, and give users more choice. It is recommended that consumers who like broad vision and light frames choose rimless or half-frame glasses. The young and fashionable people choose the ever-changing full-frame frames. There are also people who like ornamented frames, such as print flow pattern small carving, and so on, and these details on the treatment of different styles of glasses frames have the icing on the cake.
