How Do I Know My Size In Sunglasses? | KOALAEYE OPTICAL

How Do I Know My Size In Sunglasses?

Will Zenni Put Lenses In My Frames? Vous lisez How Do I Know My Size In Sunglasses? 5 minutes Suivant Lennon Sunglasses Polarized

Which sunglasses are best for driving, polarized sunglasses or non-polarized sunglasses?

Polarized and non-polarized sunglasses are the same in the ability to protect against ultraviolet rays. But when you work as a driver, in addition to the front of the sun, sometimes there are highway road reflective lights, other car body reflective lights, and so on. Glare will make people's eyes uncomfortable and fatigue, and affect the clarity of vision, stimulating the eyes. Polaroid lenses can filter out light from different angles, so when you driving, is best to wear polarized sunglasses.


How Are Glasses Made?

In this section, we will show you how glasses are made. Here are a few steps.

  1. Eyeglasses lenses are first made by an optician reviewing your prescription and taking a lens bank that closest matches your prescription.
  2. The optician puts the lens bank into a grinding machine and grinds it into a shape that matches your prescription even closer.
  3. Then the glasses lenses are edged and cut into a shape that fits the frame you chose.
  4. Last, put the cut lenses into a solution so as to protect them from scratches, then give them a tint and more.

After all steps are finished, the glasses are made successfully.



What are the causes of lens damage?

When the force area of the lens is small, the impact resistance of the lens is worse. When subjected to the impact of external forces, the lens will naturally be squeezed and cause breakage.

In particular, some lenses with low degrees and high refractive index are possible to cause this phenomenon. When the frame fell from a height due to wrong placement, there is a collision between the edge of the lens and the ground or hard objects. It will produce a broken or collapsed edge. In the process of the lens falling from high, the impact force is larger, and the stress point is smaller. When the glasses are falling, the upper edge of the lens, the convex groove of the upper frame, squeezes against the lens. The middle part of the upper half is easy to cause edge collapse. In the process of processing the template, the template is not accurate, so that the glasses side and the frame can not be uniform fusion, and the force of the lens is uneven. It will be easy to lead to greater stress in some parts, resulting in edge collapse.


What are bifocals?

A bifocal lens is a lens with two focal points. Because of the imaging principle of the lens, even half of the lens can still present a complete image, and the two images do not interfere with each other. In the past, both short-sighted glasses and presbyopia glasses were called single-focal lenses, which had only one focus. Later it developed to the bifocal lens, and the same lens is divided into upper and lower two parts. The upper part of that lens is used when seeing far, and you look down when seeing close objects, just the reading distance, naturally used the second half.



American Eyewear

With a wealth of experience, American Eyewear provides wonderful service to its customers.They provide dozens of frames from the world for you to choose from. An optician trained with years of experience can help you choose the right glasses for your face. They make sure your eyes, Bridges, and temples fit perfectly. They provide frames made from hypoallergenic SPX plastic, stainless steel, and ultralight titanium. Rimless glasses are provided. They have their own full eyewear lab facilities to ensure your prescriptions are accurate and prompt. It stores a large number of lenses like single vision, multi-focal lenses, etc.


Consider possible uncertainties after the lens is installed.

Usually, in-store frames are made of plastic samples rather than actual lenses, so they weigh slightly less. However, it is necessary to consider the approximate weight of the lens in advance according to its own degree when trying it on, in case the weight is not suitable for real wearing. If the pupil distance is too small, it is not suitable to wear a wider frame. The machinist should strictly follow the left and right pupil distance instead of taking the average, otherwise, there will be pupil distance error in the left and right eyes, which will cause discomfort in wearing.


Prix de venteA partir de
Prix de venteA partir de


Round face with square glasses

A round face is a relatively round type. This type of face looks very round but lacks a little beauty. The biggest feature of a round face is that it is softer, and the contours and features of the face will look gentle. However, it lacks a little tough line, so it is most suitable to choose square glasses for a round face. It can add a little small line to your round face and it will look more beautiful.

Laisser un commentaire

Tous les commentaires sont modérés avant d'être publiés.

Ce site est protégé par reCAPTCHA, et la Politique de confidentialité et les Conditions d'utilisation de Google s'appliquent.