Are Eye Bags Permanent?
Fri, Mar 18, 22 By : Koalaeye
Cellulose Acetate Acetate is a kind of thermoplastic resin obtained by esterifying acetic acid to acetic anhydride under the action of a catalyst. Acetate is resistant to water, gasoline, mineral oil, and lipids, weak alkaline solutions, and acids, excellent weather resistance, not resistant to ethanol, strong acids, and strong alkaline solutions. During thermoforming, it is very necessary to dry the material before forming. Acetate was born in the early 20th century, and was successfully trial-produced and industrialized by the UK...

Cellulose Acetate

Acetate is a kind of thermoplastic resin obtained by esterifying acetic acid to acetic anhydride under the action of a catalyst. Acetate is resistant to water, gasoline, mineral oil, and lipids, weak alkaline solutions, and acids, excellent weather resistance, not resistant to ethanol, strong acids, and strong alkaline solutions. During thermoforming, it is very necessary to dry the material before forming. Acetate was born in the early 20th century, and was successfully trial-produced and industrialized by the UK in the early 1920s. At present, it is the second-largest variety in cellulose fiber after viscose fiber. Acetate can be used to make textiles, cigarette filters, film bases, and plastic products.


What Is an Aspherical Lens?

An aspheric lens is a lens whose surface profiles are not portions of a sphere or cylinder. In photography, a lens assembly that includes an aspheric element is often called an aspherical lens.

The aspheric lens’s more complex surface profile can reduce or eliminate spherical aberration and also reduce other optical aberrations such as astigmatism, compared to a simple lens. A single aspheric lens can often replace a much more complex multi-lens system. The resulting device is smaller and lighter and sometimes cheaper than the multi-lens design.

Aspheric lenses are flatter than traditional lenses, but they still offer the same vision-enhancing benefits. They have a more attractive profile because there is less curvature. In addition, aspherical lenses have a more complex front surface with a gradual curve so that they can perform better by improving the way light refracts onto the retina.

Besides, most aspherical lenses are high-index, which, when combined with the aspheric design, offers a slimmer and lighter option for people who wear glasses so as to improve the look and feel.



Characteristics of titanium frames

Titanium is widely used in the eyewear industry because it is not easy to deform, fade and has strong stability. The glasses frame made of titanium can highlight the noble taste and elegant temperament. The glasses frame made of titanium can be divided into pure titanium, titanium alloy, and beta-titanium frame three kinds. To learn about titanium frames, how to identify pure titanium frames?

Titanium frame has the benefits of low density, high strength, good mechanical properties, and strong corrosion resistance. The frame is very light and not easily corroded by moisture. However, due to the poor process performance of titanium alloy, machining is very difficult, the glasses frame made of hydrogen, oxygen, nitrogen, carbon, and other chemical impurities are more absorbed. The wear resistance of titanium alloy is relatively poor, and the production process is relatively complex, so the cost is relatively high and the workmanship is relatively complicated when using this material to make the spectacle frame. The price is much more expensive than the common spectacle frame.


Why do spectacle frames rust?

Before solving this problem, we can first understand the causes of rust spots on the frames and skin allergies due to rust spots. Many alloy products in daily life contain nickel, and direct contact with the skin will cause allergies to sensitive people. The temples and nose pads are the parts that contact the skin with a large area, especially the outer surface of the metal frame and the interior of metal containing a large amount of nickel. Through contact with the skin and erosion of sweat, the appearance of rust spots and skin allergies are caused. Once allergy occurs, it will cause contact dermatitides such as redness, swelling, itching, and yellow water on the surrounding skin.



Proper massage

Proper massage can not only relieve the fatigue of the skin that supports glasses but relax the eyes. Take time each day to gently massage the marked area of the nose pad for ten minutes. Try not to wear glasses all the time. You can switch between contact lenses and glasses. In this way, over time, the nasal plate marks will gradually disappear. Hot towels can be used to warm the skin, which is helpful to blood circulation to the skin and slowly eliminate indentation.


What To Do with Old Glasses?

What to do with old glasses? Where can I donate old glasses? You may have the same troubles. So, in this section, we will show you what you should do with your old glasses.

You can choose to donate your old glasses. Around the world, about 13 million children can’t finish their education for the sole reason that they can’t see well enough to learn. In addition, there are some goodwill organizations that will take your used reading glasses as long as they are in decent shape. So, what to do with old glasses, donate them. Where can I donate old glasses? You can search the old glasses donation organizations online.

If you have a pair of old glasses, you can also choose to sell them online to save some money. You can sell them on some platforms such as eBay or Preloved.



American Eyewear Brand - Sola International

Sola is a global leader in the design and material development of eyewear lenses. Through intensive investment in research and development, Sola continuously creates innovative new products that give people around the world a better perspective on all aspects of their lives. Sola is mainly engaged in the design, development, production, and sales of different progressive high-value-added optical products. Its main products are optical lenses, sunglasses, safety lenses, and optical instruments. They have manufacturing facilities in the United States, Australia, Ireland, France, Brazil, Venezuela, Mexico, Singapore, and China. And have 41 distribution centers in 17 countries. Every day, customers in more than 50 countries and regions choose from more than 20,000 high-quality products provided by these distribution centers.

Related The Blog
Laissez un commentaire
Cart
Close
Back
Account
Close