There are three processes for resin-changing lenses.
The incorporation method, known as bulk polymerization, is similar to the method of glass lens, that is, one or more photochromic dyes are directly incorporated into the polymer monomer of the substrate for bulk polymerization, and the lens formed after curing will change color. Discoloration dye is completely integrated into the resin lens substrate, so the lens made of color persistence is very good.
The uniformity of discoloration and the depth of color after discoloration are highly related to the thickness of the lens. Because the thickness of the lenses at all levels is different, there will be a color difference between the depth of discoloration and the uniformity, and the uneven phenomenon of high brightness is more obvious.
The film type is known as the coating method. It is the chromatic resin lens by coating or dipping in a layer of chromatic dye on the base of the resin lens. Because the coating covers the surface of the lens, the color uniformity is good. The coating, which is only about 0.05mm thick, does not provide enough molecules to make the lens dark enough, so the color is relatively less dark, and the discoloration lasts slightly longer.
Infiltration, known as the penetration method, is to use the principle of penetration, through the thermal diffusion method to make the color dye permeate the surface of the resin lens sheet material, with diffusion depth up to 0.15~0.20mm. The lens has a constant color change characteristic. There will be no inconsistency between the center and the surrounding color as the luminosity gets darker. The color-changing resin lens made by infiltration type has the benefits of uniform color-changing, small color difference, fast and thorough color-fading, which is the mainstream of color-changing technology at present.
Need to re-adapt to new glasses
When the glasses were damaged, the glasses were not replaced in time. As a result, the nearsighted person wears old glasses and continues to look at things. The old glasses have 'remodeled' the eyes in the long-term process, and the eyes have adapted to the old glasses. Therefore, even if the power of the new glasses is the same as that of the old glasses, the new lenses will feel brighter. In this case, eyes produce uncomfortable symptoms. It is recommended to use the new glasses early the next morning. After a night's rest, the eyes will be easier to adapt to the new glasses. After a few days of continuous wearing, the dizziness symptoms will disappear.
Are progressive lenses good for driving?
Progressive lenses can help you see close, far, and anywhere in between. That means progressive lenses are good for driving. So you don't have to change your glasses on the way. With progressive lenses, you can easily see all distances. Standard lenses are more affordable than premium lenses, but premium lenses offer a wider field of view and are ideal for drivers.
Design principle of progressive multifocal lens
For the same piece of the lens, the top is used to see far, the bottom is used to see close. The upper and lower degrees are different.
There is not a sudden change in the distance degree fixed above the lens to the near degree fixed below the lens, but a gradual transition between the two through gradual changes in refractive power, which has special benefits over common bifocals or trifocal lenses.
What should be noticed about low bridge glasses?
At the same time, the weight of your frame should be evenly distributed across the bridge of your nose or on the nose pad of the frame. If the bridge sinks into your nose, either your nose pad needs to be adjusted better, or you need to find a frame with a wider bridge. In addition, the temple or handle of the glasses should be long enough to fit close to the ear. You should be able to move your head without slipping or slipping off your glasses. In short, for those with a lower nose, a triple match requires that the nose chassis have a thicker or adjustable nose pad, a narrower nose bridge, a wider nose bridge, and a shorter lens. If you have bought a plastic frame in the past or present, you should be able to find the size of your bridge on your current frame. Traditionally, the middle number corresponds to the measurement of the bridge. It is important to look at the position of the bridge on the frame.
How to adapt to progressive lenses?
People who are prone to motion sickness or have inner ear diseases may suffer dizziness, nausea, vomiting, and other symptoms due to their inability to tolerate the slight deformation of the visual objects, so they need to pay more attention when wearing them. For people who have not worn reading glasses before, it is not recommended to wear graded multi-focus glasses directly because their eyes will not be able to adapt quickly.
Important to measure pupils
The interpupillary distance refers to the distance between the centers of the two pupils when the visual axis is square and parallel. In general, the optical center of the glasses should coincide with the visual axis of the eye when looking at eye level. That is, the optical center distance of the glasses should be the same as the interpupillary distance. Otherwise, visual discomfort will occur, causing visual fatigue and deepening the degree. Therefore, we must improve consumers' awareness of self-quality protection. Understand the knowledge of glasses, otherwise, only mild myopia, the long-term wearing of unqualified glasses will cause the degree to deepen and become high myopia. So be sure to go to a regular optician to get glasses.
