Do Reading Glasses Really Work?
Mon, Apr 11, 22 By : Koalaeye
The production of carbon fiber glasses is complicated. Designing carbon fiber glasses was a slow and complicated process. These processes are not fast in material, force, or appearance. Resin is the key to the quality of carbon fiber. Adding resin to carbon fiber can change the material into composite material. Manufacturers of these composites want to use the least resin to hold the carbon fibers together. Full-frame glasses Full-rimed Glasses are now commonly used, which can make the lens fixed,...

The production of carbon fiber glasses is complicated.

Designing carbon fiber glasses was a slow and complicated process. These processes are not fast in material, force, or appearance. Resin is the key to the quality of carbon fiber. Adding resin to carbon fiber can change the material into composite material. Manufacturers of these composites want to use the least resin to hold the carbon fibers together.


Full-frame glasses

Full-rimed Glasses are now commonly used, which can make the lens fixed, with good protection of glasses. They are firm and easy to finalize the design, with strong hardness. Full-rim glasses frame is in the majority with plank material. The style is sporty and stylish, which is pursued by young people nowadays. Full-frame glasses are of different styles, rich colors, and can mask part of the lens thickness. The beautiful extent is very good, so are loved by many people with slightly higher degrees.



Can you repair rimless glasses by yourself?

Splice the broken temple of the glasses into its original position on the glasses. Cut a piece of tape about 10cm long and pass it through the gap between the temple of the glasses and the base of the spring. Place the tape on the inside side of the glasses and tighten the other side with your hands. Then apply the outer tape to the temple of the glasses and press it down with your hand. Cut a piece of tape about twice the circumference of the bottom of the temple of the eyeglasses and stick it around the bottom of the temple of the eyeglasses. Cut a piece of tape about twice the circumference of the upper-middle part of the temple and use it to stick the top of the tape used in the first step. Then a piece of tape roughly twice the circumference of the middle leg of the glasses was used to tape the area between the two steps. Then repeat the previous step, and introduce another layer of tape from the gap on the outside of the adhesive tape. First, cut off a piece of tape as long as the temple of the glasses and stick the end of it to the bottom of the temple at an angle of about 60 degrees. Then tighten the other end with your hand, making it stick upward in a spiral until it covers all the tape in front.


What Are Bifocal Glasses?

Bifocal lenses are divided into two parts to accommodate two different prescriptions in one lens. One area of the lens will have one prescription (usually distance) and a segment in the lower half will have the other (usually near vision).

Bifocal glasses are most used to correct presbyopia - an age-related eye condition where the eyes begin to struggle to focus on anything up close. This difficulty usually results in people requiring glasses with two different prescriptions, one for short and one for long-distance.

On bifocal glasses, there is a distinct line between the different prescriptions. Wearers have to look up and down to switch between the prescriptions they need, with long-distance prescriptions at the top and near vision at the bottom.



Testing of aspheric lens

The optical axis of the optical center just overlaps with the visual axis of the eye, which is the most ideal state. Because the light from the edge cannot form a focus on the optical axis, when the optical axis does not overlap with the visual axis (the difference is greater than 2mm), such unclear and scattered imaging results will occur. When choosing frames and aspheric lenses, you need to ensure that they fit correctly, to achieve the best visual and decorative effects. Simply put, due to the special design of the lens, we found through a calculation that the optical center should move down 1mm higher than the pupil for every 2° increase in front inclination angle. Otherwise, the wrong pupil height will cause the lens to look like astigmatism, and cause discomfort. For glasses with aspheric lenses, there must be an inclination angle after wearing. The specific angle varies from person to person.


Police - Glasses For Men

The Italian brand POLICE can be viewed as comprehensive development, maintaining the Enthusiasm and professionalism of the Italian people in the metal industry. Adopting a solid and flexible plate material frame, the fashionable avant-garde design is loved by the hipster. A narrow edge frame can strengthen the facial line, and the logo in the temple reveals brand position, becoming the vane in the design of numerous frames. It is followed and respected by aggressive, independent, and creative people all over the world, and has become an important brand leading the life trend in the world.



Can clear lenses be polarized?

At present, there are no clear polarized lenses. A polarized lens is a thin film vertically arranged with silicon crystal coating placed inside the lens, just like a shutter, which covers the parallel light and only allows the vertical light to pass through. In this way, the glare from all directions can be eliminated, so it is clear and comfortable to wear. Transparent polyamide, the material of nylon lens, is a new variety of polyamide. The material of the nylon lens is mainly transparent polyamide. Due to the effect of the light filter, only light from a specific direction is allowed to pass through the lens, which filters the dazzling light from the sun on the water, land, or snow very well. It can not only make the landscape soft, clear, and natural but protect the eyes to a certain extent.

Related The Blog
Dejar un comentario
Cart
Close
Back
Account
Close