Can Yellow Lenses Be Polarized?
Thu, Apr 07, 22 By : Koalaeye
Advantages Of TR90 Frames Lightweight. The weight is about half the weight of the plate frame, which can reduce the burden on the bridge of the nose and ears, and it is also comfortable to wear for a long time. Bright colors. Compared with ordinary plastic frames, the color of TR90 frames is even better. Impact resistance. The TR90 frame is extremely flexible, and its good elasticity can effectively prevent damage to the eyes caused by impact during sports. Regardless...

Advantages Of TR90 Frames

  • Lightweight. The weight is about half the weight of the plate frame, which can reduce the burden on the bridge of the nose and ears, and it is also comfortable to wear for a long time.
  • Bright colors. Compared with ordinary plastic frames, the color of TR90 frames is even better.
  • Impact resistance. The TR90 frame is extremely flexible, and its good elasticity can effectively prevent damage to the eyes caused by impact during sports.

Regardless of whether it is a sheet frame or a TR90 frame, they have their own advantages. You can choose them according to your requirements, Importantly, it is comfortable to wear and good-looking.


Color process of Contact lenses

Pigment printing process

It refers to the direct printing of pigments or patterns on the inside of the lens and then drying, which is the main production process of poor-quality chromatic contact lenses. Usually, small factories and small workshops use this method. The lens is being phased out because the pigment can easily seep out from the surface during wearing, causing discoloration and staining, and irritation to the eyes, which is a big risk.

Pigment build-in process

To be specific, the lens made by sandwich technology is a three-layer structure, the front and rear are colorless transparent layers, and the middle is a colored layer. After the processing of sandwich technology, the color layer is wrapped in the middle of the front and rear transparent layer, so that the pigment will not contact the eyes, which will not cause irritation and injury to the eyes. The downside of this process, however, is that the lenses are slightly thicker than normal contact lenses and are less oxygen-permeable, so they are not suitable for long-term wear.

The pressed film manufacturing process

This is a relatively new method of a similar sandwich process, and the color (pattern) is also made between the front and rear layers of the lens. But the color (pattern) is used to fill in the film process. During lens curing, the pigment seeps into the material instead of sticking to the surface. It feels as if the lens is covered in color within a single layer. This reduces the middle layer and makes the lens thinner, which naturally makes it more comfortable and permeable to oxygen.



What's the significance of the glasses donation campaign?

The eye loves public welfare activities can increase the public awareness of eye love. China has one of the highest incidence rates of myopia in the world. With the popularity of computers and mobile phones, myopia is becoming more and more common among teenagers. Visual health is a significant component of universal health. Public awareness of eye health needs to be improved. It is the responsibility of an enterprise to support economic and social development and care for the poor and vulnerable groups. Nowadays, the myopia of teenagers is becoming more and more worrying. Good eyesight is not only very important in the learning stage, but also accompanies a person's life, so it is the responsibility and obligation of enterprises to help prevent and control the myopia of teenagers. The glasses donation activity shows the glasses industry's active action and professional spirit of fulfilling social responsibility and advocating social welfare. They can take practical actions to fulfill corporate social responsibility and help teenagers grow up. At the same time, people from all walks of life should take active actions to pay attention to the eyesight health of young people.


How do you identify the refractive index of lens?

In reality, this problem is often a problem for optical shop practitioners, sometimes they worry about whether the manufacturer's lenses match the nominal value of the refractive index. We need a prop, and that's the camber. Because it can be used to measure the strength of the lens. The luminosity of the lens can be calculated by subtracting the curvature of the inner and outer surfaces of the lens. The curvature difference of a lens of the same luminosity is inversely proportional to the refractive index, that is, a lens with a higher refractive index only needs a smaller curvature difference to achieve the same luminosity.



Titanium alloys have low thermal elasticity

The thermal conductivity of titanium is about 1/4 of nickel, 1/5 of iron, 1/14 of aluminum, and the thermal conductivity of different titanium alloys is about 50% lower than that of titanium.

The elastic modulus of titanium alloy is about 1/2 that of steel, so its rigidity is poor and is easy to deform, and it is not suitable to make slender rods and thin wall parts. When cutting, the spring back of the processing surface is very large, about 2 ~ 3 times of stainless steel, resulting in severe friction, adhesion, and bonding wear of the knife surface.


New Fashion Police Men's Polarized Sunglasses Driving Glasses

They have high quality. The lens material is a polarized lens. The frame color is silver/gold/brown/black and the visibility rate is 99(%). UV protection rating is UV400,with 100% UV protection. They are suitable for driving, fishing, daily leisure.

Most accidents happen at night and before dawn, which has a lot to do with glare and the problem of many people having blurred vision in the dark. Every driver knows the trouble of driving at night: glare, bright reflections, and bright lights from oncoming traffic. In addition, poor visibility at night can make driving tiring and dangerous!



Types of Progressive Lenses

At the same time, there are different types of progressive lenses and they are standard PALs, short corridor PALs, computer PALs, and Reading PALs.

Standard PALs must fit your vision needs. They can be added to frames of your choice, but you need to ensure that the frames are the right width and height proportions to grant enough space for the gradient changes in the lens.

Short corridor PALs are made to fit into smaller frames so as to suit a wider range of eyewear styles.

Computer PALs are designed for computer users and other occupations that require strong intermediate and distance vision.

Reading PALs are designed for those who enjoy reading and they can opt for a pair of lenses with a larger close vision zone.

Related The Blog
Dejar un comentario
Cart
Close
Back
Account
Close