Best Cheap Aviator Sunglasses
Sat, May 07, 22 By : Koalaeye
How to Adjust Crooked Glasses If one side of your frame looks higher than the other, you need to adjust the arms of your glasses. So, how to adjust glasses? If the right side is higher than the left, you need to gently bend the left arm down at the hinge or where the arm bends behind your ear. If the left side is higher than the left, so just do the same action on the opposite side. When adjusting...

How to Adjust Crooked Glasses

If one side of your frame looks higher than the other, you need to adjust the arms of your glasses. So, how to adjust glasses?

If the right side is higher than the left, you need to gently bend the left arm down at the hinge or where the arm bends behind your ear. If the left side is higher than the left, so just do the same action on the opposite side.

When adjusting crooked glasses, you need to adjust frames a little bit at a time to avoid overcompensating and possibly damaging your glasses. You can run the arms under the warm water but do not running the warm water over the lenses because it will affect the lens coating.


Round face with square glasses

A round face is a relatively round type. This type of face looks very round but lacks a little beauty. The biggest feature of a round face is that it is softer, and the contours and features of the face will look gentle. However, it lacks a little tough line, so it is most suitable to choose square glasses for a round face. It can add a little small line to your round face and it will look more beautiful.



Should I wear driving glasses at night?

In fact, it is not safe to use any colored lenses while driving. You might consider how much color plays in your average driving experience. Red, yellow, green, orange traffic signs, and other vital signs are designed to remind you to pay attention to safety signals and directions while driving. However, if you see everything turn yellow, you may miss a sign and end up making the wrong decision at the traffic light, or worse, an accident.

Another disadvantage is that they do not have a prescription. If you are looking for a pair of standard night driving glasses on the market, you will find that most of them are standard over-the-counter glasses. To have night-driving glasses that can correct vision, you must customize them in an optical shop, and the price is much higher. Under the hype of the night vision feature, you can expect the cost of prescription night driving glasses to be too high. You can find more information about how prescription glasses work on our blog!


Can You Get Prescription Gamer Glasses?

Most gaming glasses are not designed to be worn on top of your prescription eyeglasses, but you still have some other options.

You can order gaming glasses with prescription lenses. Make sure the frames are optical grade so they can accommodate lenses of varying thickness.

You can also choose clip-on gaming glasses because they are easy to store and light to wear.

Order daily glasses with anti-reflective or blue-light coating because they can also protect your eyes.



Blue light blocking glasses lenses and common glasses lenses have different colors.

The real blue-light-blocking glasses should be yellow. Based on the primary principles of optics, the light reflected from the lens is the light that resists the same color as it. As the name indicates, blue light is to prevent the reflection of blue light. Remove blue light, and all the red, yellow, blue, and green in visible light is yellow.


What are the benefits of Silhouette?

The wonderful style suits both men and women. The glasses are made of strong, reliable, and not heavy metal. They adopt a screw-free design and high-quality process. The glasses are made of titanium alloy temples and are highly ergonomic. They are not heavy and elastic (only 1.8 grams in weight), independent of momentum changes and extreme gravity. The temples and nose pads are made of hypoallergenic titanium alloy. With no screws and hinges, they provide optimal safety in space conditions.



The design evolution of progressive lenses

Spherical and aspheric designs

The design of the front surface of the far-use area of the early progressive lens is similar to that of the ordinary spherical single vision lenses, so it is called a spherical progressive lens. Since 1974, the front surface of the far-use region of the lens is designed to be aspheric by designers, which not only reduces the peripheral aberration but makes the lens thinner, lighter, and less powerful.

Hard and soft design

For hard design, the channel is short, and the gradient is large. The near-use area position is high. The effective visual area of remote and near-use areas was larger. Peripheral astigmatism is relatively concentrated. Because surrounding astigmatism increases rapidly and the distribution is dense, the curve effect is more obvious. The gradient area is narrow. It is more difficult and takes longer for wearers to adapt.

Lenses with soft designs have slower gradients, longer gradients, and wider gradients. The angle of rotation of the eye from the far area to the near area is greater. It's easier to get used to. Compared with the hard design, the effective visual area of the far and near use areas is smaller, and the location of the near use area is lower.

Single, diverse, and individualized design

Initially, the progressive lenses used a single design, in which each basic curve was scaled equally and a luminosity combination was added within the range of its semi-finished lens blanks. The steepest base curve uses the same lens design as the flattest base curve. Lenses designers quickly realized that the overall performance of the lens could be improved by microcustomizing the lens design, leading to progressive lenses with multiple designs. This kind of design is called diverse design. By the mid-1990s, there was the emergence of individualized lens designs. In addition to using different gradients, these first individualized lens designs used steeper baseline curves with a slightly larger approach area to compensate for increased magnification and reduced field of view.

Symmetrical and asymmetric design

There is no difference between the left and right eyes in the symmetrical design of progressive lenses. As the eyes turn inward when they see near objects, the gradual gradient area gradually tilts to the nasal side from top to bottom, so the left/right progressive lenses should be rotated clockwise/counterclockwise respectively during processing. An asymptotic lens with left and right eye divisions is called an asymmetric design. The gradient is gradually and moderately inclined to the nasal side from top to bottom. The refractive force, astigmatism, and vertical prism of the two sides of the left and right gradient of the asymmetric design lenses are basically similar. At the same time, considering the characteristics of eye movement parameters in binocular vision, the peripheral aberrations of the corresponding positions of the left and right lenses were appropriately balanced to improve the visual effect of the wearer.

Related The Blog
Dejar un comentario
Cart
Close
Back
Account
Close