Are Back Glasses Too Harsh?
Fri, Mar 18, 22 By : Koalaeye
Advantages Of TR90 Frames Lightweight. The weight is about half the weight of the plate frame, which can reduce the burden on the bridge of the nose and ears, and it is also comfortable to wear for a long time. Bright colors. Compared with ordinary plastic frames, the color of TR90 frames is even better. Impact resistance. The TR90 frame is extremely flexible, and its good elasticity can effectively prevent damage to the eyes caused by impact during sports. Regardless...

Advantages Of TR90 Frames

  • Lightweight. The weight is about half the weight of the plate frame, which can reduce the burden on the bridge of the nose and ears, and it is also comfortable to wear for a long time.
  • Bright colors. Compared with ordinary plastic frames, the color of TR90 frames is even better.
  • Impact resistance. The TR90 frame is extremely flexible, and its good elasticity can effectively prevent damage to the eyes caused by impact during sports.

Regardless of whether it is a sheet frame or a TR90 frame, they have their own advantages. You can choose them according to your requirements, Importantly, it is comfortable to wear and good-looking.


How To Use Contact Lens Correctly?

A periodic review is necessary. In the process of wearing contact lenses, the eyes may change due to the existence of contact lenses. At the same time, in the process of wearing contact lenses, the lens may be polluted, damaged, and have other changes. This is to check regularly to prevent damage to the eyes. Usually, the recommended review period is one week, one month, three months, half a year, and once every half a year after wearing it.



Can you adjust your glasses by yourself?

If your frames are not suitable, adjusting your glasses at home may be easier than you think. You can solve the most common problems in the frame by yourself, but sometimes taking your glasses to an optician is the best thing to do. Of course, if your problem is your lenses, that's something you can't usually fix at home.


The weight difference between pure titanium frames and titanium frames

Titanium frames are slightly heavier than pure titanium frames, but they are both high-quality materials, so they are more comfortable on the outside. The specific gravity of pure titanium is generally 4.5, while titanium alloy is 8.9, which means the material is equivalent to half of the titanium alloy. So the frames are lighter in your hand.



Identify the lenses of discount glasses

Look at the overall package: let him show you the overall package of the lens. See that if the factory is in China, Shanghai, China, or Zhejiang, China, etc. Look at the anti-counterfeiting logo. It doesn't necessarily mean it's good. Check the production plant, address, news, etc. In short, lens judgment, for the average consumer, is difficult, but when you put forward these requirements, the store will at least think you are more professional.


What are the advantages and disadvantages of bifocal reading glasses?

The advantage of bifocal reading glasses is a large field of vision, and they can be used with the same pair of glasses to see far, near. The cost is lower. But different areas have obvious intervals, and the appearance is not beautiful. The middle distance is fuzzy. They need to adapt to the period. Bifocal reading glasses lens is divided into two parts, and the degree of the two parts is not the same. The upper part is the mother of the flat area to see far, and the next part is the child of the reading area to see near. There is an obvious interval. The appearance is not beautiful. There is no transition area between two different areas, so its vision is fuzzy, easy to produce a 'jump image'. Long-term wearing will make people dizzy or fall down when climbing stairs.



Color process of Contact lenses

Pigment printing process

It refers to the direct printing of pigments or patterns on the inside of the lens and then drying, which is the main production process of poor-quality chromatic contact lenses. Usually, small factories and small workshops use this method. The lens is being phased out because the pigment can easily seep out from the surface during wearing, causing discoloration and staining, and irritation to the eyes, which is a big risk.

Pigment build-in process

To be specific, the lens made by sandwich technology is a three-layer structure, the front and rear are colorless transparent layers, and the middle is a colored layer. After the processing of sandwich technology, the color layer is wrapped in the middle of the front and rear transparent layer, so that the pigment will not contact the eyes, which will not cause irritation and injury to the eyes. The downside of this process, however, is that the lenses are slightly thicker than normal contact lenses and are less oxygen-permeable, so they are not suitable for long-term wear.

The pressed film manufacturing process

This is a relatively new method of a similar sandwich process, and the color (pattern) is also made between the front and rear layers of the lens. But the color (pattern) is used to fill in the film process. During lens curing, the pigment seeps into the material instead of sticking to the surface. It feels as if the lens is covered in color within a single layer. This reduces the middle layer and makes the lens thinner, which naturally makes it more comfortable and permeable to oxygen.

Related The Blog
Dejar un comentario
Cart
Close
Back
Account
Close