How about Blupond's night goggles?
Unlike regular dark sunglasses, night vision glasses don't block much light and have a higher transmittance than day sunglasses that block sunlight but can barely see at night. The night driving glasses use clear yellow lenses with an anti-glare coating and blue polarized light filters that prevent harmful light from entering the macula and causing degeneration. It works by allowing only the healthiest wavelengths of light to reach the eye and keeping visibility high in the dark, reducing glare.
Adjustment of the angle of the nose pad
For the angle of the nose pad, you can apply torque in the horizontal or vertical direction according to the deformation needs. It can be held in the proper part of the nose pad with needle-nose pliers, and the torque can be applied at a certain angle in the vertical plane or horizontal plane to achieve the purpose in accordance with the deformation needs. In the time of repeated actions, in order to prevent the welding place of the nose pad and the glasses ring from breaking due to repeated stress deformation, you can use your fingers to apply external force at the welding place to change the deformation position and play the purpose of protection.
Sports goggles
With the improvement of people's sports concept and sports protection concept, sports goggles are also widely welcomed. Safety glasses are worn during sports must have four major functions, safety (PC lenses), protection (TR-90 frame, soft and flexible), comfortable (non-slip nose pads and foot covers), and beauty (match sports and leisure clothing).
Sports goggles with shatter-resistant plastic lenses and side shields can prevent balls or sand from hitting the eyes. It can be fixed on the head without worrying about falling off during intense movements. The unique design of the rim of the frame makes the glasses very close to the human face and has a proper external isolation effect so that the human eye is not easy to be attacked by bacteria. The special lens has the functions of anti-fog, anti-shock, and ultraviolet rays, which is very suitable for outdoor activities.
How to Find Reading Glasses Strengths?
Some reading glasses also come with strengths. So, how do you know what strength reading glasses to get and how to find reading glasses strengths? The strength of all reading glasses is measured in dioptre, with units increasing by 0.25 dioptre depending on the power of the lens.
The reading glasses strengths range from +0.75 dioptre to +3.00 dioptre. Both lenses have the same power which is indicated by a permanent marking on the inside of the frame or with a removable sticker on the lens. So, you can find the reading glasses strengths of the glasses.
The important thing you need to notice is that when higher the number, the greater the power of the lenses is when choosing reading glasses. So, glasses with a marking of 1.0 are low power while those marking +3.0 are high powered.
The Disadvantages of Trifocal Glasses
Here, we will show you the disadvantages of trifocal glasses. If you wear the trifocal glasses for the first time, you may spend some time getting used to them. Adjusting to wearing trifocal glasses can take some time. The different fields of vision can make them disorienting at first, but over time you will get used to wearing them and your eyes will naturally move to the prescription they need for the task at hand. You may be interested in this post: How Long Does It Take to Get Used to New Glasses?
Why do spectacle lenses fog up?
The fog on the surface of the lens is essentially related to the saturation pressure and water vapor liquefaction. The air is full of water molecules, which are constantly doing irregular movements. When there is no temperature difference, water molecules keep hitting the surface of the lens and will keep bouncing off. The lower the temperature, the slower the speed of movement. Therefore, when water molecules hit the cold lens from the hot air, on the one hand, they move too slowly to fly out in time. On the other hand, because of the relatively low temperature of the lens itself and its vicinity, the water vapor will liquefy. As a result, more and more water will accumulate on the lens and form small droplets, eventually forming a foggy layer. As the lens heats up, the mist evaporates back into the air, and the fog disappears.
Don’t Do When Cleaning Glasses
Here are something you can’t do when cleaning the glasses.
1. Don’t use your shirttail, blouse, or other clothing to clean your glasses, especially when the lenses are dry because they will scratch your lenses.
2. Don’t use the saliva to wet your lenses.
3. Don’t use some surface cleaners to clean your eyeglasses because they may damage glasses lenses and coatings.
4. Don’t use some paper to clean your lenses, such as paper towels, napkins, or some tissues. They may scratch or smear your lenses or make them full of lint.
5. Don’t try to remove a scratch on your lenses by buffing away. This action can make the situation worse.
