Why Is My Vision Not 20/20 After Cataract Surgery?
Sun, Apr 03, 22 By : Koalaeye
Polygonal frame Polygonal glasses frame is derived from square glasses frame. Some of the frames belong to mechanical cutting, and the lens has an exquisite diamond design, very popular with consumers. The irregular frame makes the glasses more angular and makes the frames less monotonous. It's more stylish and trendy. Gold is more popular, but the price is not high. How can I measure the frame size? Use a ruler to measure the glasses you used to wear comfortably and...

Polygonal frame

Polygonal glasses frame is derived from square glasses frame. Some of the frames belong to mechanical cutting, and the lens has an exquisite diamond design, very popular with consumers. The irregular frame makes the glasses more angular and makes the frames less monotonous. It's more stylish and trendy. Gold is more popular, but the price is not high.


How can I measure the frame size?

Use a ruler to measure the glasses you used to wear comfortably and record the width of the frame and the total width in front of the frame. And compared with the frame width of the selected frame and the total front width of the frame. Frame width size difference of one or two millimeters does not matter, and the total front width of four millimeters does not matter. You can use a ruler to measure the approximate distance between the temples. Usually, the width of the inner side of the frame is the same as the temple value or about 3MM larger than the temple value.



About Prism Glasses

The refractive index of the same medium is different for different colors of light. Different colors of light travel at different speeds in the same medium. Because the same medium has a different refractive index for various monochromatic light, and the deflection angle of each monochromatic light is different when passing through a prism. Therefore, white light through a prism will separate the monochromatic light, known as dispersion. What is the prism effect of glasses? As long as there is a deviation between the visual channel of the eye and the optical center of the lens, it can produce a prism effect. Therefore, the severity of the prism effect can be used to measure whether the glasses with the correct prescription are processed correctly and reshaped correctly.


The Disadvantages of Polycarbonate Lens

In this section, we will show you the disadvantages of polycarbonate glasses.

First, the polycarbonate lens is expensive than other regular lenses. It can cost up to double the price of regular eyeglasses.

Second, compared with high-index lenses, polycarbonate glasses have a lower abbe value, which is used to measure the dispersion of light for different eyeglasses lens materials. Polycarbonate lens rates lower mean they have the potential to cause slight chromatic aberrations in your peripheral vision.

Third, compared with Trivex lens, polycarbonate lens has bad durability since they are thinner and lighter.



Design principle of aspheric lens

Early optical lenses use spherical lenses. Because the glasses were small round frames, the problem of lens edge aberration was not paid attention to. It wasn't until large frames became popular that the problem became apparent. For the spherical lenses, aberration cannot be corrected with the combined lens. Only a few variables of the lens can be found to reduce aberration and improve clarity. Aspheric lenses are designed to reduce the aberration of optical correction lenses and to make lenses flatter and reduce lens magnification. We can get clearer, thinner, lighter-quality lenses. Thus, aspheric lenses are used to reduce aberration and astigmatism to a minimum, close to the natural vision of the naked eye. The spherical aberration can be reduced by changing the curvature of the edge. The refraction in the central region is high and decreases evenly toward the edges.


The working principle of driving glasses

The driving glasses are designed according to the polarized angle and radian of the lens and the principle of precision optics. It can only let the beneficial light pass through, and other light sources, like strong sunlight, car headlights, and other light sources are filtered, to eliminate the interference of external light, and avoid the appearance of eye-catching, dazzling, and other situations. That's basically how the driver glasses are designed.



The Cons of Rimless Glasses

As there is no frame around your glasses lenses, the rimless glasses may be more likely to break. If you are not very careful with your glasses, you may have to replace them on a constant basis.

Rimless glasses are higher than other framed glasses because of the details that go into this style. In fact, the rimless style needs more work and time. So, making this kind of style is more time-consuming. So, rimless glasses are expensive than framed glasses.

From the above information, if you like rimless glasses, you can try them. Thus, you can buy them from Koalaeye Optical, which is an online store and provides all kinds of glasses, sunglasses, and frames. So, try Koalaeye glasses and the glasses will be mailed for you with your great convenience.

Related The Blog
Submit comment
Cart
Close
Back
Account
Close