Which Color Lens Is Best For Sunglasses? | KOALAEYE OPTICAL

Which Color Lens Is Best For Sunglasses?

Sunglasses For Fishing - Prosun

The headquarter of Prosun?is located in Xiamen City, Fujian Province. ?In the development process of more than 20 years, Prosun?has been committed to the research and development of optical products. The product design style has closely followed the trend, and the quality materials have useful workmanship. And the comfort is continuously improved, with the combination of fashion design concept and science. It is committed to providing young people's favorite glasses products.


Refractive index of spectacle lens

It is generally believed that the higher the refractive index, the better the spectacle lens. Such spectacle lenses are relatively thin, and of course, the price is a bit expensive. When the refractive index increases, the direction of the light entering the lens will change greatly, the focus will move to the lens, the focal length will be smaller, and the diopter will become larger. In order to keep the diopter unchanged, it is necessary to reduce the curvature of the lens, that is, to reduce the curvature of the mirror surface, so that the thickness of the lens can be reduced. This is why the larger the refractive index, the thinner the lens is. Under the same premise of other things, the larger the refractive index, the thinner the lens, the lighter and more beautiful the lens, and the higher the price, but the larger the refractive index is not the better.



Types of aspheric lenses

There are two types of aspheric lenses: single aspheric surface (single aspheric surface for short, different from the outer aspheric surface and inner aspheric surface) and double aspheric surface (double aspheric surface for short). For the outer aspheric surface, convex is an aspheric surface and concave is a spherical surface. For the inner aspheric surface, a convex surface is a sphere, and a concave surface is an aspheric surface. In addition to correcting aberrations, the double aspheric lens also improves the effective field of vision compared to the single aspheric surface. When people's eyes look through the edge of the lens to see things, like driving when looking at the reflective mirror, it often affects vision because of the large aberration at the edge of the lens. Previous designs of aspheric plates have analyzed a single ray of light passing through the center of the pupil. Wavefront technology controls the entire beam of light passing through the pupil, eliminating high-order aberrations.


How To Choose Better Night Driving Glasses?

You should select light alloy material and polymer material with memory, collision resistance, and low friction coefficient characteristics. It can effectively prevent the damage to the eyes and face caused by the friction of the broken lens frame during use. Because of its specific molecular structure, the chemical resistance is good. In the high-temperature environment. it is not easy to deform and can withstand 350 degrees in a short time of high temperature, not easy to melt and combustion. The glasses made of this material are light and strong, and the ears will not be uncomfortable because of wearing the glasses for a long time.



Color process of Contact lenses

Pigment printing process

It refers to the direct printing of pigments or patterns on the inside of the lens and then drying, which is the main production process of poor-quality chromatic contact lenses. Usually, small factories and small workshops use this method. The lens is being phased out because the pigment can easily seep out from the surface during wearing, causing discoloration and staining, and irritation to the eyes, which is a big risk.

Pigment build-in process

To be specific, the lens made by sandwich technology is a three-layer structure, the front and rear are colorless transparent layers, and the middle is a colored layer. After the processing of sandwich technology, the color layer is wrapped in the middle of the front and rear transparent layer, so that the pigment will not contact the eyes, which will not cause irritation and injury to the eyes. The downside of this process, however, is that the lenses are slightly thicker than normal contact lenses and are less oxygen-permeable, so they are not suitable for long-term wear.

The pressed film manufacturing process

This is a relatively new method of a similar sandwich process, and the color (pattern) is also made between the front and rear layers of the lens. But the color (pattern) is used to fill in the film process. During lens curing, the pigment seeps into the material instead of sticking to the surface. It feels as if the lens is covered in color within a single layer. This reduces the middle layer and makes the lens thinner, which naturally makes it more comfortable and permeable to oxygen.


You can choose driving goggles.

The goggles partly filter the far-light from the car. Products sold online include glasses with yellow lenses and yellow translucent shades that clip onto car shades. Shades block out oncoming far-light, while glasses prevent rearview mirror glare from vehicles behind. Most of the light emitted by car headlights is short-wavelength ultraviolet and blue light. The yellow polyester blocks them while allowing the longer wavelengths of red and green light to pass through, making the headlights softer when seen through the goggles without reducing the brightness of the road and the surrounding environment.


Sale priceFrom
Tortoiseshell Acetate Square Sunglasses | KOALAEYETortoiseshell Acetate Square Sunglasses | KOALAEYE
Rose
Sale price$45.00 USD


Invincilites Zeta V

The Invincilites Zeta V is a pair of oval rimless glasses with minor trim and hollow temples. Invincilites Zeta V has rugged, not heavy stainless steel with laser-polished temples and design-inspired details. It includes an adjustable nose pad case.

Leave a comment

All comments are moderated before being published.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.