Agstum Blue Light Blocking Glasses - Flexible Rimless Titanium Alloy Eyeglasses Frames
The frame is equipped with anti-blue light lenses, which you can easily replace with your own if you have eye problems. Blue light-proof lenses are to make you have a better sleep. They are to prevent harmful blue light, which provides all-day protection against the harmful effects of high-energy visible light and UV400. You can enjoy your digital time without worrying about eye strain, blurry vision, and headaches. It uses a durable memory metal optical frame.
Step-by-Step Glasses Size Guide
In this section, we will show you how to perform glasses measurements. But the first thing is to know what face shape you have. If you do not know, click here to have a check.
Then you need to know where to find the size measurement of your glasses. In general, you will find numbers that look like this 51-17-145 at the temples of your eyeglasses. Of course, these numbers come at different meanings.
The first number often refers to the lens width. Lens width is the horizontal diameter of the lens at its widest point. In optometry, another term is eye size.
The second number often means the bridge width. Bridge width is the part that joins the two lenses and sits over the nose. Some refer to this as the gap. The bridge width varies between 14 and 24 millimeters.
The third number often means the temple length. The temple is the arm that keeps the sunglasses on your face. That arm extends to the part that hangs on the ears. The length is usually 135, 140, or 145 millimeters.
Lens height measures the size of the lens vertically, that is from the top to the bottom of the lens. Although sizes may differ depending on the brand, the standard size is somewhere between 32 and 38 millimeters.
What Are Anti-Glare Glasses?
Anti-glare glasses are made with lenses that have an anti-glare coating or anti-reflective coating. This is an extremely thin layer placed on the lens itself so as to remove any reflections you might see from the surface of the glasses. This improves your vision by reducing the amount of glare that reflects off of your lenses.
About Non-polarized Sunglasses
Non-polarized sunglasses block only commonly strong light and filter ultraviolet rays. And the efficiency of its filter ultraviolet ray is lower. But you know, in our daily life, in addition to strong light and ultraviolet light, the light through the uneven road surface, water, and other places will also produce an irregular diffuse reflection of light, so that the human eyes will suffer blurred vision, fatigue. Generally speaking, for a short period of outdoor sports, the non-polarized sunglasses can already meet your needs.
The Optical Center of A Lens
When wearing glasses, try to look through the optical center of the lens. This needs the cooperation of the neck, you can slightly lower the head when looking at the computer, to adjust the line of sight. The Center of optical glasses is divided into two kinds: 1 mm up myopic lens center is the most proper, of course, more than 2-3. And the most important thing is that the lens pupil high (about the two-lens optical center of the high and low) must be proper (that is, the right of the lens optical center is 1 mm, the left must be 1 mm. 2-3 mm is the same, what is the height of the pupil on the right side must be the same on the left side. The optical center of the presbyopic lens is 1 mm, the most proper.
Anti-fouling Coating
The lens coated with anti-reflection film is pretty prone to stain, and the stain will affect the transmittance of the lens. Microscopically, the anti-reflection film shows a porous structure, therefore, the oil is very easy to soak in it. The solution is to coat a layer of anti-fouling film with anti-oil performance on anti-reflection film. The film is very thin and will not change the optical performance of the anti-fouling film. The material is mainly fluoride. There are two processes, one is the immersion method, one is the vacuum coating method (the most commonly used).
How do I know what size glasses frame I need?
With unified factory product size, why others can wear without problems, but there is a problem when I wear the glasses? There are differences between the contours of each person's face, including factors such as the width of the head, the distance between the ears and the corners of the eyes as the crow flies, the thickness of the bridge of the nose, and so on, which involves ergonomics. But there is one thing we can agree on. When people with the same ear distance wear the same type of glasses, they have different feelings, even if the arm length of the glasses is the same. People with fatter faces will feel uncomfortable. The face will be uncomfortable because the ear distance is the same, but the face width is not the same, resulting in an increased oblique distance of the temple, resulting in a sense of pressure.
It is very simple to solve this problem. You need to look at a variety of parameters in the frame of the glasses, including the total width of the frame, the length of the arm. These parameters will be reflected in a qualified spectacle frame.
