How sunglasses are made 2

How do they make sunglasses?

In the previous article, we discussed “Should Dogs Wear Sunglasses?”. In this article, let’s talk about “How do they make sunglasses?”.

If you want to know how sunglasses are made, first you should know the composition of sunglasses. There are three parts of sunglasses, lens, frame and temple.

Manufacture Of The Frame and Temples

Cut Out The Frame

Before cutting the plastic board, we will heat it first. Heating can improve the ductility of the material. Press with a steel knife. And cut out the outline of the frame on the plastic board. Then follow the inner curve to cut out the inner frame.

Cut Out The Groove

Continue to deal with the inner frame to create a groove for placing the spectacle lens. Using a blade in the frame to cut out the groove which is used to lock the spectacle lens.

Three-Dimensional Cutting

After cutting out the exterior of the glasses, it needs to be transferred to another cutting machine. According to the model, cut the three-dimensional shape of the nose bridge.

Polishing The Frame

Now put the frame in the roller filled with sanding stones to rotate. This is the step of polishing. After finish this step, you can feel the edges of the frame to see if there is any roughness.

Making Temples

The temples are also made of plastic plates. So the procedure of making temples is the same as the frame. Cut the material after heat the plastic plate. And then the outline of temples comes out. After that, we have to reheat the temples to insert the steel wire core as the backbone of the temples.

Connect Frame With Temples

The last step is to connect frame with temples. Insert the connector on the edge of the frame, and then connect with the temples with screws.

Sale priceFrom
Sale priceFrom

Manufacture of Sunglasses Lenses

Press Lenses

When produce the lenses, we need to add colorant compounds into the glass raw material powder. By this way, the dark sunglasses can absorb more light to reduce the intensity of sunlight. The shearing machine first cuts a section of high-temperature molten glass, which is the main body of the lens. And a stamper presses it into an arc-shaped lens.

Chemical Treatment

We need to send the lens to chemical treatment. Through the ionic exchange, a metal coating is plated on the surface of lens.

Contour Cutting

In this step, lens will be sent to make the final shape, which is to fit the spectacle frame you choose. Different frames have different lens contours.

Mirror Coating

Some lenses also have a reflective coating on the outer surface. This coating which is a bit like a mirror for the lens can help to reflect sunlight to protect the eyes. However, unlike the silver plating made by mirrors, this coating is very sparse. So it is also called semi-silvered.

Install The Lens

Do you know how the lens was inserted into the plastic frame in the factory? The lens is just directly inserted into the frame. Put one side of the spectacle lens into the groove on the nose bridge of the frame first. And then heat it slightly, so the spectacle frame will be malleable. At this time, the lens can be directly inserted into the frame.

Thank you for your time in reading our passage “How do they make sunglasses?”. For more information about sunglasses and eyeglasses, please continue to follow koalaeye.com. Also, it is welcome to share and forward to Facebook and Twitter.

 

Leave a comment

All comments are moderated before being published.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.