How Much Do Progressive Lenses Cost? | KOALAEYE OPTICAL

How Much Do Progressive Lenses Cost?

Photochromic Sunglasses Review Reading How Much Do Progressive Lenses Cost? 7 minutes Next What Causes Dry Eyes All Of A Sudden?

What are the causes of lens damage?

When the force area of the lens is small, the impact resistance of the lens is worse. When subjected to the impact of external forces, the lens will naturally be squeezed and cause breakage.

In particular, some lenses with low degrees and high refractive index are possible to cause this phenomenon. When the frame fell from a height due to wrong placement, there is a collision between the edge of the lens and the ground or hard objects. It will produce a broken or collapsed edge. In the process of the lens falling from high, the impact force is larger, and the stress point is smaller. When the glasses are falling, the upper edge of the lens, the convex groove of the upper frame, squeezes against the lens. The middle part of the upper half is easy to cause edge collapse. In the process of processing the template, the template is not accurate, so that the glasses side and the frame can not be uniform fusion, and the force of the lens is uneven. It will be easy to lead to greater stress in some parts, resulting in edge collapse.


How do I choose the right glasses frames?

Choosing a frame is largely a matter of personal preference. However, in addition to the style, you need to check the comfort level to see if there are problems like ear clips, nose compression, skin irritation, and so on. Please note that if you are highly short-sighted, try full-frame glasses, because full-frame glasses can hold heavier lenses more reliably. Below are a few easy ways to determine which frames would best flatter your face and show off your style and personality.

Step 1: Identify your face shape. Identifying your face shape is a good place to start when it comes to learning how to select frames which will suit your face shape.

Step 2: Choose colors that complement your skin tone. If you have a cool-colored skin tone, opt for shades of black, gray, and blue. If your skin tone is warm, you would benefit from warm colors, such as tan, pink, and red. As always, when you learn how to select frames, it is easy to know which colors suit your skin.

Step 3: Consider your way of living. When considering how to select frames for your lifestyle, one of the most important things is to make sure the frames fit at the bridge of your nose. This will allow your glasses to stay put better. If you exercise often, comfortable, sturdy frames are a must. If you want to look the part at an important business meeting, you can choose stylish frames with a variety of angles. If you need sunglasses for the beach, go for soft, colorful frames that will complement your relaxed vibe.

Step 4: Flaunt your personality.Frames are the perfect way to show off who you are and your personality. In the process of learning how to select your frames, you cannot forget to choose those that show off your personal style. You can find the perfect shapes, colors, or patterns, but those qualities mean very little if you aren’t comfortable.



How can I measure the frame size?

Use a ruler to measure the glasses you used to wear comfortably and record the width of the frame and the total width in front of the frame. And compared with the frame width of the selected frame and the total front width of the frame. Frame width size difference of one or two millimeters does not matter, and the total front width of four millimeters does not matter. You can use a ruler to measure the approximate distance between the temples. Usually, the width of the inner side of the frame is the same as the temple value or about 3MM larger than the temple value.


Who need progressive lenses?

There is no limit to the degree of progressive multifocal lenses. Whether it is nearsightedness, presbyopia or moderate astigmatism, it can be worn, but not everyone can wear it. There are two types of progressive multifocal lenses on the market, one is hard and the other is soft. The main difference between the two designs is the length of the progressive channel. The rigidly designed progressive film has a short progressive path and relatively less peripheral aberrations. In order to ensure vision at various distances, fewer vertical dimensions are required. For example, a teenage progressive film belongs to this design, but because of its short gradual path, the gradation process is too short. Fast. Compared with the elderly, this design is more difficult to adapt; the soft design of the progressive film has a relatively long gradation channel and relatively large peripheral aberrations, but due to its long gradation channel, the gradation process is relatively smooth, which makes it easy to wear glasses It is suitable for people with poor adaptability.

If you are a person who is able and willing to accept new things, understand and adapt to the temporary discomfort caused by progressive addition lenses, we suggest that he can wear a pair, if he has severe hypertension, dizziness and other symptoms, or People who have misunderstandings about progressive lenses and are unwilling to adapt should not try them. Because you first wear progressive multifocal glasses, you may experience: slight dizziness, shaking when walking, and being careful when moving up the stairs.

The perception of space has changed, the perception of the distance of the object, and the perception of depth have changed. New wearers should not drive immediately and do strenuous exercise. When you look close, you need to turn your eyes down, and your eyes are mildly uncomfortable. Seeing an object through the blurred vision area around the lens makes the object blurred. Therefore, when new wearers look at things, turn their heads more, turn their eyes less, try to use the far-use zone, the near-use zone, and the middle-distance zone to see objects.



Evolution of photochromic lenses

Thirty years after Corning invented color-changing glass lenses, another company has carried forward the color-changing glass lenses --Transitions Optical. In 1991, it became the first company to commercially manufacture resin color-changing lenses. Since its inception, the company has been a joint venture between PPG Industries (51%) and Essilor (49%). In April 2014, Essilor acquired a 51% stake in PPG. At present, the mainstream is resin photochromic lenses.


Alloy glasses frame

Spectacle frames made of the alloy have relatively high hardness, are more resistant to friction, are not easy to fade, have a better texture, and are made of more styles, which are essential for fashionistas.


Sale priceFrom
Sale priceFrom


Tortoise Glasses

This unique pattern is the perfect choice for those who want to wear tops and jackets of any color. They fit almost any color. Tortoise glasses come in many colors, and this stylish pattern has a wide palette, so there's no need to worry about skin and hair color. If you want to keep up with current eyewear trends, unique-patterned tortoiseshell glasses are your best bet.

Leave a comment

All comments are moderated before being published.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.