How to determine whether progressive lenses are worn correctly?
Once your glasses are back from the lab, the optometrist will let you put them on for an audition and make final adjustments to make sure they fit. If the prescription is not in the center of the lens, it will make it difficult for you to see clearly. The key is that the lenses match the wearer's eyes, especially the pupils. Before ordering a new lens, the optometrist takes two measurements: pupil distance and fitting height.
Is it necessary to repair the glasses that are badly damaged?
If your glasses are badly damaged, think about getting a new pair. Maintenance is maintenance, not a replacement, so there are some traces of maintenance. The repair cost is far more than or can buy a new pair of glasses, so there is no need to repair them. For the kind of alloy that's used for cheap glasses and the kind of alloy that's used for high-end glasses, the texture of the welding is so different. There are differences in intensity. In order to make the cheap glasses strong after welding, it will definitely increase the welding marks (solder repair, etc.), so the marks will be obvious.
Color process of Contact lenses
Pigment printing process
It refers to the direct printing of pigments or patterns on the inside of the lens and then drying, which is the main production process of poor-quality chromatic contact lenses. Usually, small factories and small workshops use this method. The lens is being phased out because the pigment can easily seep out from the surface during wearing, causing discoloration and staining, and irritation to the eyes, which is a big risk.
Pigment build-in process
To be specific, the lens made by sandwich technology is a three-layer structure, the front and rear are colorless transparent layers, and the middle is a colored layer. After the processing of sandwich technology, the color layer is wrapped in the middle of the front and rear transparent layer, so that the pigment will not contact the eyes, which will not cause irritation and injury to the eyes. The downside of this process, however, is that the lenses are slightly thicker than normal contact lenses and are less oxygen-permeable, so they are not suitable for long-term wear.
The pressed film manufacturing process
This is a relatively new method of a similar sandwich process, and the color (pattern) is also made between the front and rear layers of the lens. But the color (pattern) is used to fill in the film process. During lens curing, the pigment seeps into the material instead of sticking to the surface. It feels as if the lens is covered in color within a single layer. This reduces the middle layer and makes the lens thinner, which naturally makes it more comfortable and permeable to oxygen.
Blue light in natural light
Blue light is not the unique light emitted by electronic products, but the visible light that exists in natural light, usually with a wavelength of about 400-500nm. The blue light in the entire waveband can be subdivided into two parts. One part will cause optical damage to the retina of the eye and accelerate the oxidative senescence of cells in the macular area of the retina. Usually, the wavelength of this part of blue light is between 415-450nm, and its damage to the eyes is gradually accumulated and formed. There is also a part of blue light that is beneficial to our human body, that is, blue light with a wavelength of about 480nm. It can adjust biological rhythms and is helpful for sleep, mood, and memory. In addition, experiments have confirmed that daily outdoor activities in the sun can effectively prevent the occurrence of myopia, and short-wavelength blue light may play an important role.
Blue Light Glasses Benefits
As mentioned above, blue light glasses are good for our eyes. What are the other benefits of blue light glasses?
1.Reduce Eye Strain
One of the benefits of blue light glasses is reducing eye strain. Looking at a screen all day can make you feel stressed, or you may experience eye and muscle strain. So, the blue light blocking glasses can help to reduce eye strain.
Blue light has a high frequency which can increase alertness and delay the body’s release of melatonin. So, you had better turn off your device an hour or two before going to bed. Or you can choose to wear a pair of blue light glasses to sleep better.
Wearing blue light glasses can effectively help you to reduce headaches.
4.Fewer Eye Diseases
A large amount of blue light is bad for our health. So, wearing blue light glasses can reduce the chance of eye diseases.
With so many blue light glasses benefits, do you want to get a pair of blue light blocking glasses? If so, you can try the Koalaeye Optical blue light blocking glasses. It enables you to wear comfortable and look in style at a reasonable price.
Quality and price have benefits
EyeglassesDepot.com is unbeatable in quality and price.There are two on-site LABS that provide low prices.In reality, other repair sites you may have visited may have used our facilities to repair customers' frames.The cost of repair is ensured to be minimal.
The material of the nose pads
There are many differences between silica gel and PVC materials. For example, silicone can pass ROHS certification and is environmentally friendly. Silica gel is soft and feels good, while PVC products are rough. Silica gel products are soft, while PVC products are hard. Silica gel products are more flexible, but PVC has no toughness. Silica gel products are usually made to be more transparent. Glass frames made of plate material and TR-90 material, are relatively not heavy and non-allergic. Typically, the TR90 frame is cast to form a nose pad attached to the glasses ring. As the plate frame is cut out from compressed materials, the plate frame with a nose pad is usually injected into the nose pad after the frame is made.