Apart from memory metal frames, what other frames are the most durable?
Nylon plastic frames are the most durable frames available. It is hypoallergenic and flexible. But they are easier to break than metal frames, and their overall strength is reduced by sunlight and the aging process. Titanium and titanium alloy metals are used to make some of the most durable frames. Their strength can be compared with that of stainless steel, but titanium frames provide more options than stainless steel in terms of texture, pattern, and color.
The frames use the best acetate from the best suppliers in Europe. The factory that produces acetate is located in northern Italy. Although there are many other acetate manufacturers, they are arguably the best at what they do. In that industry, their acetate has been used in optical manufacturing since 1849.
What are keyhole glasses used for?
The keyhole distributes the weight of the glasses to one side of the nose rather than the top. It's a good choice for those with broad noses. Due to the lack of support at the top, the keyhole design will result in the frame being positioned lower than the saddle bridge frame. If you find that your saddle frame causes your eyes to be located just below the center of the lens area, you may try a wider frame or opt for a keyhole design.
How to maintain a hard-coated lens?
The hard-coated resin lenses can be identified by the sound of the tabletop tapping and the color brightness of the lenses. The lenses, which sound clear and have bright edges, are hardened. In daily use, avoid overheating environment. Avoid contacting with alkaline liquid, so as not to cause damage to the lens. And this damage is usually not formed in an instant.
Long-term use, sun exposure, and so on may make the coating slowly fall off. If the production of hard film technology is worse, the film is easier to fall off. When cleaning and adding a hard-coated lens, clean the particles on the front and rear surfaces of the lens with clean water first, and then blot dry with a clean soft cloth. Do not wipe the surface when the lens is dry.
How To Choose Better Night Driving Glasses?
Driving at night has a high accident rate because of poor visibility, blinding headlights, and fatigue. Now the market exists a few main glasses: sunglasses polarizing lenses, Glasses that use or mimic the first generation of patented technology. So how do you compare the options between driving and wearing glasses?
Night driving lens is relatively special compared with daily driving lens, not only to prevent strong light and see the road more clearly. According to the national motor vehicle driver special glasses standards, QBT 2659-2004 daily light transmittance should be more than 8%, night light transmittance should be more than 75%. Be sure to consult customer service. Ask about the situation. Note that a pair of polarized sunglasses are not suitable for use at night, and the light transmittance must reach the national safety standards.
The first inventor of wearable glasses is not known. However, it was the Romans who first discovered the use of glass to enhance their ability to see small words, creating small magnifying glasses with spheres. The first known wearable glasses in history appeared in Italy in the 13th century. They were used mainly by monks, and became popular little by little during the Renaissance, as the technology improved. As their popularity grew, the Italian glasses spread throughout Europe, mostly within reach of the wealthy. Because learning was a prized attribute during the Renaissance, glasses were a status symbol of wisdom and prosperity. With the temple extending above the ear, the glasses are no longer required by hand.
Can't Use Alcohol To Clean Glasses
Generally speaking, alcohol is not suitable for cleaning resin lenses. Resin lenses are relatively soft and are usually coated with a film. It not only improves the hardness of the lens, but also has more other functions. The lens film is not suitable for cleaning with harsh cleaning agents. As we all know, alcohol has a certain stimulating effect, so it is harmful to the film of the lens.