Driver's protective glasses
The principle of the driver's protective glasses is to use the special film on the glasses to reflect the strong light hitting the glasses back to protect the eyes. It can protect against ultraviolet, infrared and blue light on foggy and rainy days. In snowy weather and at night, the wearer can see the scenery more clearly, and it can also increase the vividness of red, yellow, green, white, and other colors, and eliminate the glare and reflected light of the oncoming cars when meeting cars at night.
The design evolution of progressive lenses
Spherical and aspheric designs
The design of the front surface of the far-use area of the early progressive lens is similar to that of the ordinary spherical single vision lenses, so it is called a spherical progressive lens. Since 1974, the front surface of the far-use region of the lens is designed to be aspheric by designers, which not only reduces the peripheral aberration but makes the lens thinner, lighter, and less powerful.
Hard and soft design
For hard design, the channel is short, and the gradient is large. The near-use area position is high. The effective visual area of remote and near-use areas was larger. Peripheral astigmatism is relatively concentrated. Because surrounding astigmatism increases rapidly and the distribution is dense, the curve effect is more obvious. The gradient area is narrow. It is more difficult and takes longer for wearers to adapt.
Lenses with soft designs have slower gradients, longer gradients, and wider gradients. The angle of rotation of the eye from the far area to the near area is greater. It's easier to get used to. Compared with the hard design, the effective visual area of the far and near use areas is smaller, and the location of the near use area is lower.
Single, diverse, and individualized design
Initially, the progressive lenses used a single design, in which each basic curve was scaled equally and a luminosity combination was added within the range of its semi-finished lens blanks. The steepest base curve uses the same lens design as the flattest base curve. Lenses designers quickly realized that the overall performance of the lens could be improved by microcustomizing the lens design, leading to progressive lenses with multiple designs. This kind of design is called diverse design. By the mid-1990s, there was the emergence of individualized lens designs. In addition to using different gradients, these first individualized lens designs used steeper baseline curves with a slightly larger approach area to compensate for increased magnification and reduced field of view.
Symmetrical and asymmetric design
There is no difference between the left and right eyes in the symmetrical design of progressive lenses. As the eyes turn inward when they see near objects, the gradual gradient area gradually tilts to the nasal side from top to bottom, so the left/right progressive lenses should be rotated clockwise/counterclockwise respectively during processing. An asymptotic lens with left and right eye divisions is called an asymmetric design. The gradient is gradually and moderately inclined to the nasal side from top to bottom. The refractive force, astigmatism, and vertical prism of the two sides of the left and right gradient of the asymmetric design lenses are basically similar. At the same time, considering the characteristics of eye movement parameters in binocular vision, the peripheral aberrations of the corresponding positions of the left and right lenses were appropriately balanced to improve the visual effect of the wearer.
Lunor - Glasses For Men
Many of Lunor's metal frames are made from high-quality titanium, gold, and stainless steel. In addition to the special process of making titanium, all-metal frames are made by hand in a factory in Germany, fully reflecting the craftsmanship and thought behind the production of the brand. The texture and professional demeanor of the glasses are strong. The brand is very good at combining classical and modern. What we can see is that the nose pad and the frames are made of pure titanium, so there's no allergic effect.
Contact Lens Materials - HEME Mixed Materials
Using HEMA as the matrix, other monomer components are added to improve the hydrophilicity, oxygen permeability, anti-precipitation, and other functions of the lens.
Clean Glasses Properly
If the glasses are dirty, don't just wipe them with other cloth. If you use some hard cloth to wipe, it is easy to cause scratches in the lens. Generally speaking, the following cleaning methods are all feasible.
1. Use neutral or alkaline cleaning agent. Remember, toothpaste cannot be used as a substitute for the cleaning agent for spectacle lenses. General optical shops also sell lens cleaners in small bottles, which are easy to carry.
2. Go to the optical shop for professional ultrasonic cleaning. General optical shops provide free cleaning services. The ultrasonic cleaning machine can fully clean every gap and groove of the glasses.
3. Rinse the lens with tap water. Hold the frame in one hand and the cleaner in the other hand. Rub it slowly against the lens, and then rinse it off with clean water. Then wipe it with a glasses cloth or let it dry naturally.
In addition to the glasses cannot be cleaned with alcohol, you should also pay attention to their placement for daily maintenance. Try to avoid putting it under high temperature, and avoid oily, smoke, etc. If you don't use them, put them in the glasses case.
Business style glasses
The style of business frames is mostly pure titanium series, simple and generous, with strong texture, flexible, highlighting the wisdom and calm of business elites, while the high standard of comfortable feature has always been the pursuit of this type. . Business style frame has a calm atmosphere and suit collocation complement each other, improve the overall temperament. In the negotiation and cooperation, they can leave a good impression. With A strong sense of the quality of the business, for work or leisure, they make you become the focus.
How to clean the lenses?
When wiping lenses (especially the rimless glasses of resin lens), you must use a special wipe lens or soft handkerchief or paper. When you wipe the lens, you can only wipe it in one direction, not in circles, and don't touch the lens with your fingers. When the lens is stained with dust and sand, it should be washed with water before wiping, otherwise, the lens is likely to be abraded, and the operation should be gentle. At ordinary times, when cleaning, do not exert too much force, pay attention to the grasp of strength. When wiping the lens, it is best to take the side frame with one hand, and the other hand takes the glasses cloth to wipe gently. In order to prevent the lens film layer falls off, do not use alkaline detergent to wipe the lens. Therefore, when bathing or playing at the seaside, glasses should be properly kept to avoid water vapor or seawater caused by corrosion of glasses.